SHIH-JUNG LIU

Education & Experiences

Visiting Professor, University of Wisconsin-Madison, USA 2019

Visiting Professor, Yamagata University, Japan 2017

Visiting Professor, Tokyo Institute of Technology, Japan 2004.

Visiting Professor, Aachen University of Technology, Germany 2000.

Visiting Professor, Tokyo Institute of Technology, Japan 1998.

Post-Doctoral Research Fellow, McMaster University, Canada 1993.

Ph.D., University of Wisconsin-Madison, USA 1992.

M.E., Cornell University, USA 1989.

B.S. National Taiwan University, Taiwan 1986.

Research Interests

Bioabsorbable medical devices, drug delivery, tissue engineering, nanofibers, core-shell microspheres

Polymer processing, water (gas) assisted injection molding, micro/nano optical/electrical devices, rotational molding, ultrasonic welding, micro/nano-structure embossing

Awards

lWorld's top 2% scientists list, 2022.
lWorld's top 2% scientists list, 1960-2022.

lWorld's top 2% scientists list, 2021.

lWorld's top 2% scientists list, 1960-2021.

lWorld's top 2% scientists list, 2020.

lWorld's top 2% scientists list, 1960-2020.

lAnnual Distinguished Research Award-Polymer Applications, The Polymer Society, Taipei, Taiwan, 2015.

lAnnual Research Award, Chang Gung University, 2011.

lMorand Lambla Award, The International Polymer Processing Society, 2008

lAnnual Research Award, Chang Gung University, 2005.

lInternational Representative (Taiwan), Asian Workshop on Polymer Processing, since 2010.

lInternational Representative (Taiwan), The International Polymer Processing Society, since 2001.

Editorship

lEditor, Journal of Polymer Engineering, since 2004.

lAssociate Editor, Journal of Biomedical Nanotechnology, since 2016.

lAssociate Editor, Asia Pacific Journal of Chemical Engineering, since 2008-2017

lEditorial Board, International Polymer Processing, since 2005.

lEditorial Advisory Board, Plastics, Rubber and Composites, since 2004.

lGuest Editor, Nanomaterials, 2017-2018.

lGuest Editor, Pharmaceutics, 2018-2019.

lGuest Editor, Membranes, 2020.

lGuest Editor, Polymers, 2020-2021.

lGuest Editor, International Journal of Molecular Sciences, 2022.

Selected Publications

2024

230) S.S. Lin, S.J. Liu, E.C. Chan, K.Y. Chong,Y.S. Chan, T.T. Tsai, C.C. Niu, L.J. Yuan, C.Y. Yang, H.Y. Hsiao, Y.J. Hsueh, C.A. Chen, S.W.N. Ueng. Development of a Biodegradable PLGA Carrier to Provide Wnt Agonists and Antibiotics to Meet the Requirements for Patients with Bone Infections. Pharmaceuticals, 17(8), 1038 (2024) (SCI)

229) Y.P. Chen, T.S. Lo, Y.H. Chien, Y.H. Kuo, S.J. Liu*. In vitro and in vivo drug release from a nano-hydroxyapatite reinforced resorbable nanofibrous scaffold for treating female pelvic organ prolapse. Polymers, 16, 1667 (2024) (SCI) (指導作者)

228) K.H. Cheng, T.L. Hsieh, S.J. Liu*, C.J. Chiang, J.C. Chen*. Synthesis and characterization of indeno-fused naphthopyrans containing methacryloyl and urethane groups for photochromic contact lenses applications. European Polymer Journal, 211, 113044 (2024) (SCI) (指導作者)

227) Y.C. Chou, Y.H. Hsu, D. Lee, J.W. Yang, Y.H. Yu, S.J. Liu*. Novel bioresorbable drug-eluting mesh scaffold for therapy of muscle injury. ACS Biomaterials Science and Engineering, 10, 2595−2606 (2024) (SCI) (指導作者)

226)  S.J. Shen, P.C. Feng, R.C. Wu, Y.H. Kuo, S.J. Liu*. Resorbable nanofibrous membranes for local and sustained co-delivery of acyclovir and ketorolac in herpes therapy. International Journal of Pharmaceutics, 654, 123988 (2024) (SCI) (指導作者)

225)  Y.H. Hsu, Y.C. Chou, C.L. Chen, Y.H. Yu, C.J. Lu, S.J. Liu*. Development of novel hybrid 3D-printed degradable artificial joints incorporating electrospun pharmaceutical- and growth factor-loaded nanofibers for small joint reconstruction. Biomaterials Advances, 159, 213821 (2024) (SCI) (指導作者)

2023

224)   Y.H. Yu, C.H. Lee, Y.H. Hsu, Y.C. Chou, B.K. Hong, C.T. Huang, S.J. Liu*Novel CO2-encapsulated Pluronic F127 hydrogel for the treatment of Achilles tendon injury. Scientific Reports, 13, 21895 (2023) (SCI) (指導作者)

223)   Y.H. Yu, C.H. Lee, Y.H. Hsu, Y.C. Chou, P.C. Yu, C.T. Huang, S.J. Liu*. Anti-adhesive resorbable indomethacin/bupivacaine-eluting nanofibers for tendon rupture repair: in vitro and in vivo studies. International Journal of Molecular Sciences, 24, 16235 (2023) (SCI) (指導作者)

222)   S.S. Lin, S.W.N. Ueng, K.Y. Chong, Y.S. Chan, T.T. Tsai, L.J. Yuan, S.J. Liu, C.Y. Yang, H.Y. Hsiao, Y.J. Hsueh, C.A. Chen, C.C. Niu. Effects of Hyperbaric Oxygen Intervention on the Degenerated Intervertebral Disc: From Molecular Mechanisms to Animal Models. Cells, 12, 2111 (2023) (SCI)

221)   S.Y. Chen, F.Y. Lee, R.C. Wu, C.E. Chao, C.J. Lu, S.J. Liu*. Hybrid Resorbable 3D-printed Mesh/electrospun Nanofibrous Drug/biomolecule-eluting Mats for Alveolar Ridge Preservation. Polymers, 13, 3445 (2023) (SCI) (指導作者)

220)   C. Wang, S.J. Liu, C.H. Chang. Thickness of simple calcaneal tuberosity avulsion fractures influences the optimal fixation method employed. Bone Joint Research, 12(8), 504–511 (2023) (SCI)

219)   Y.H. Yu, C.H. Lee, Y.H. Hsu, Y.C. Chou, P.C. Yu, S.J. Liu*. Electrospun Nanofibrous Composite Membranes for Long-Term Release of Celecoxib for Achilles Tendon Reconstruction Following Injury. Macromolecular Materials and Engineering, 2023, 2300149 (2023) (SCI) (指導作者)

218)   Y.C. Chou, Y.H. Hsu, D. Lee, J. Ho, Y.H. Yu, S.J. Liu*. Novel additively manufactured tubular scaffold combined with electrospun biomolecules-embedded nanofibers promotes healing of ruptured tendon. Materials & Design, 230, 111953 (2023) (SCI) (指導作者)

217)   C.H. Lee, D.Y. Chen, M.J. Hsieh, K.C. Hung, S.C. Huang, C.J. Cho, S.J. Liu*. Nanofibrous Insulin/Vildagliptin Core-shell PLGA Scaffold Promotes Diabetic Wound Healing. Frontiers in Bioengineering and Biotechnology, 11, 1075720 (2023) (SCI) (指導作者)

216)   Y.H. Hsu, Y.H. Yu, Y.C. Chou, C.J. Lu, Y.T. Lin, S.W.N. Ueng, S.J. Liu*. Sustained Release of Antifungal and Antibacterial Agents from Novel Hybrid Degradable Nanofibers for the Treatment of Polymicrobial Osteomyelitis. International Journal of Molecular Sciences, 24, 3254 (2023) (SCI) (指導作者)

2022

215)   C.H. Lee, C.H. Huang, K.C. Hung, S.C. Huang, C.C. Kuo, S.J. Liu*. Nanofibrous Vildagliptin/PLGA Membranes Accelerate Diabetic Wound Healing by Angiogenesis. Pharmaceuticals, 15, 1358 (2022) (SCI) (指導作者)

214)   C.H. Lee, S.C. Huang, K.C. Hung, C.J. Chao, S.J. Liu*. Enhanced Diabetic Wound Healing Using Electrospun Biocompatible PLGA-Based Saxagliptin Fibrous Membranes. Nanomaterials, 12, 3740 (2022) (SCI) (指導作者)

213)   D. Lee, Y.K. Lin, S.C. Hsu, Y.L. Tang, S.J. Liu*. Factors determining the flow erosion/part deformation of film insert molded thermoplastic products. International Polymer Processing, 37(4), 442–451 (2022) (SCI) (指導作者)

212)   Y.H. Yu, S.J. Shen, Y.H. Hsu, Y.C. Chou, P.C. Yu, S.J. Liu*. Tri-layered doxycycline, collagen and bupivacaine loaded poly(lactic-co-glycolic acid) nanofibrous scaffolds for tendon rupture repair. Polymers, 14, 2659 (2022) (SCI) (指導作者)

211)   C.H. Lee, M.J. Hsieh, J. Roth, X. Fu, C.H. Lu, K.C. Hung, C.C. Kuo, S.J. Liu*. Hybrid core-shell nanofibrous scaffolds/stent delivery angiotensin II receptor blocker to treat diabetic artery disease. ACS Applied Polymer Materials, 4, 4199-4207 (2022) (SCI) (指導作者)

210)   Y.H. Hsu, Y.H. Yu, D. Lee, Y.C. Chou, C.K. Wu, C.J. Lu, S.J. Liu*. Pharmaceutical-eluting hybrid degradable hydrogel/microparticle loaded sacs for finger joint interpositional arthroplasty. Biomaterials Advances, 137, 212846 (2022) (SCI) (指導作者)

209)   C.J. Weng, Y.C. Wu, M.Y. Hsu, F.P. Chang, S.J. Liu*. Electrospun, resorbable, drug-eluting, nanofibrous membranes promote healing of allograft tendons. Membranes, 12, 529 (2022) (SCI) (指導作者)

208)   C.J. Weng, C.T. Liao, M.Y. Hsu, F.P. Chang, S.J. Liu*. Simvastatin-loaded nanofibrous membrane efficiency on the repair of Achilles tendons. International Journal of Nanomedicine, 17, 1171-1184 (2022) (SCI) (指導作者)

207)   K.S. Liu, W.H. Chen, C.H. Lee, Y.F. Su, Y.W. Liu, S.J. Liu*. Novel Biodegradable 3D-printed Analgesics-eluting-nanofibers Incorporated Nuss Bars for Therapy of Pectus Excaratum. International Journal of Molecular Sciences, 23, 2265 (2022) (SCI) (指導作者)

206)   S.J. Shen, Y.C. Chou, S.C. Hsu, Y.T. Lin, C.J. Lu, S.J. Liu*. Fabrication of ropivacaine/dexamethasone-eluting microparticles via electrospraying technique for postoperational pain control. Polymers, 14, 702 (2022) (SCI) (指導作者)

205)   P.Y. Chou, D. Lee, C.C. Weng, R.C. Wu, C.T. Liao, S.J. Liu*. Bone Morphogenetic Protein-, Antimicrobial Agent-, and Analgesic-Incorporated Nanofibrous Scaffolds for the Therapy of Alveolar Clefts. Pharmaceutics, 14, 374 (2022) (SCI)(指導作者)

204)   P.Y. Chou, D. Lee, S.H. Chen, C.T. Liao, L.J. Lo, S.J. Liu*. 3D-printed/electrospun bioresorbable nanofibrous drug-eluting cuboid frames for repair of alveolar bone defects. International Journal of Pharmaceutics, 15, 121497 (2022) (SCI) (指導作者)

2021

203)   C.H. Lee, K.S. Liu, J.G. Roth, K.C. Hung, Y.W. Liu, S.H. Wang, C.C. Kuo, S.J. Liu*. Telmisartan Loaded Nanofibers Enhance Re-Endothelialization and Inhibit Neointimal Hyperplasia. Pharmaceutics, 13, 1756 (2021) (SCI) (指導作者)

202)   S. Morelli, S.J. Liu, L. De Bartolo. Membrane Systems for Tissue Engineering 2020. Membranes, 11, 763 (2021) (SCI)

201)   Y.H. Yu, Y.T. Lin, Y.H. Hsu, Y.C. Chou, S.W.N. Ueng, S.J. Liu*. Biodegradable Antimicrobial Agent/Analgesic/Bone Morphogenetic Protein-Loaded Nanofibrous Fixators for Bone Fracture Repair. International Journal of Nanomedicine, 16, 5357-5370 (2021) (SCI) (指導作者)

200)   Y.P. Chen, T.S. Lo, Y.T. Lin, Y.H. Chien, C.J. Lu, S.J. Liu*. Fabrication of Drug-Eluting Polycaprolac-tone/Poly(Lactic-co-Glycolic Acid) Prolapse Mats Using Solution-Extrusion 3D Printing and Coaxial Electrospinning Techniques. Polymers, 13, 2295 (2021) (SCI) (指導作者)

199)   Y.Y. Tseng, T.Y. Chen, S.J. Liu*. Role of polymeric local drug delivery in multimodal treatment of malignant glioma: A review. International Journal of Nanomedicine, 16, 4597–4614 (2021) (SCI) (指導作者)

198)   M.Y. Hsu, C.H. Hsieh, Y.T. Huang, S.Y. Chu, C.M. Chen, W.J. Lee, S.J. Liu*. Enhanced paclitaxel efficacy to suppress triple-negative breast cancer progression using metronomic chemotherapy with a controlled release system of electrospun poly-D-L-lactide-co-glycolide (PLGA) nanofibers. Cancers, 13, 3350 (2021) (SCI) (指導作者)

197)   K.S. Liu, C.W. Kao, Y.Y. Tseng, S.K. Chen, Y.T. Lin, C.J. Lu, S.J. Liu*. Assessment of antimicrobial agents, analgesics, and epidermal growth factors-embedded anti-adhesive poly(lactic-co-glycolic acid) nanofibrous membranes: In vitro and in vivo studies. International Journal of Nanomedicine, 16, 4471-4480 (2021) (SCI) (指導作者)

196)   Y. Srithep, T. Akkaprasa, D. Pholharn, J. Morris, S.J. Liu, P. Patrojanasophon, T. Ngawhirunpat. Metronidazole-loaded polylactide stereocomplex electrospun nanofibers mats for treatment of periodontal disease. Journal of Drug Delivery Science and Technology, 64, 102582 (2021)  (SCI)

195)   Y.H. Yu, S.J. Liu*. Polyetheretherketone for orthopedic applications: A review. Current Opinion in Chemical Engineering, 1, 100687 (2021) (SCI) (指導作者)

194)   T.C. Yang, S.J. Liu, W.L. Lo, S.M. Chen, Y.L. Tang, Y.Y. Tseng. Enhanced anti-tumor activity in mice with temozolomide-resistant human glioblastoma cell line-derived xenograft using SN-38-incorporated polymeric microparticle. International Journal of Molecular Sciences, 22, 5557 (2021) (SCI)

193)   T.Y. Yu, J.W.S. Pang, L.P. Lin, J.W. Cheng, S.J. Liu, W.C. Tsai. Platelet-rich plasma releasate promotes early healing in tendon after acute injury. The Orthopaedic Journal of Sports Medicine, 9(4), 2325967121990377 (2021) (SCI)

192)   D. Lee, M.Y. Hsu, Y.L. Tang, S.J. Liu*. Manufacture of binary nanofeatured polymeric films using nanosphere lithography and ultraviolet roller imprinting. Materials, 14, 1669 (2021) (SCI) (指導作者)

191)   C.J. Weng, Y.C. Wu, S.J. Liu*. Manufacture of unitary/binary ordered arrays employing self-assembled nanocolloid lithography. Japanese Journal of Applied Physics, 60, 036502 (2021) (SCI) (指導作者)

190)   D. Lee, Y.L. Tang, S.J. Liu*. Fast Fabrication of Nanostructured Films Using Nanocolloid Lithography and UV Soft Mold Roller Embossing: Effects of Processing Parameters. Polymers, 13, 405 (2021)(SCI) (指導作者)

189)   P.Y. Chou, Y.C. Chou, Y.H. Lai, Y.T. Lin, C.J. Lu, S.J. Liu*, Fabrication of Drug-Eluting Nano-Hydroxylapatite Filled Polycaprolactone Nanocomposites Using Solution-Extrusion 3D Printing Technique. Polymers, 13, 318 (2021) (SCI) (指導作者)

188)   S.J. Shen, D. Lee, Y.C. Wu, S.J. Liu*.Binary self-assembly of nanocolloidal arrays using concurrent and sequential spin-coating techniques. Materials, 14, 274 (2021) (SCI) (指導作者)

2020

187)   C.H. Lee, K.S. Liu, C.W. Cheng, E.C. Chan, K.C. Hung, M.J. Hsieh, S.H. Chang, X. Fu, J.H. Juang, I.C. Hsieh, M.S. Wen, S.J. Liu*. Co-delivery of sustainable anti-microbial agents and platelet-derived growth factor via biodegradable nanofibers for repair of diabetic infectious wounds. ACS Infectious Diseases, 6, 2688-2697 (2020) (SCI) (指導作者)

186)   Y.Y. Tseng, T.C. Yang, S.M. Chen, S.T. Yang, Y.L. Tang, S.J. Liu*.Injectable SN-38-embedded polymeric microparticles promote antitumor efficacy against malignant glioma in an animal model. Pharmaceutics, 12, 479 (2020) (SCI) (指導作者)

185)   J.M. Chen, D. Lee, J.W. Yang, S.H. Lin, Y.T. Lin, S.J. Liu*. Solution-extrusion additive manufacturing of biodegradable polycaprolactone. Applied Sciences, 10, 3189 (1-14) (2020) (SCI) (指導作者)

184)   M.Y. Hsu, Y.T. Huang, C.J. Weng, C.M. Chen, Y.F. Su, S.Y. Chu, J.H. Tseng, R.C. Wu, S.J. Liu*. Preparation and in vitro/in vivo evaluation of doxorubicin-loaded poly[lactic-co-glycol acid] microspheres using electrospray method for sustained drug delivery and potential intratumoral injection. Colloids and Surfaces B: Biointerfaces, 190, 110937 (2020) (SCI) (指導作者)

183)   Y.H. Yu, D. Lee, Y.H. Hsu, Y.C. Chou, S.W.N. Ueng, C.K. Chen, S.J. Liu*. A three-dimensional printed polycaprolactone scaffold combined with co-axially electrospun vancomycin/ceftazidime/bone morphological protein-2 sheath-core nanofibers for the repair of segmental bone defects during the Masquelet procedure. International Journal of Nanomedicine, 15, 913–925 (2020) (SCI) (指導作者)

182)   J.M. Chen, K.C. Liu, W.L. Yeh, J.C. Chen, S.J. Liu*. Sustained Release of Levobupivacaine, Lidocaine and Acemetacin from Electrosprayed Microparticles: In vitro and in vivo studies. International Journal of Molecular Sciences, 21, 1093 (1-15) (2020) (SCI) (指導作者)

181)   Y.Y. Tseng, C.K. Kao, K.S. Liu, Y.L. Tang, Y.W. Liu, S.J. Liu*. Treating Intracranial Abscesses in Rats with Stereotactic Injection of Biodegradable Vancomycin-Embedded Microparticles. Pharmaceutics,  12, 91 (2020) (SCI) (指導作者)

180)   J.M. Chen, Y.Y. Tseng, D. Lee, Y.T. Lin, S.H. Lin, T.Y. Lee, S.J. Liu*, H. Ito. A robust experimental model to explore the three-dimensional printing of polylactide parts: solution vs. melt extrusion. Applied Sciences, 10, 509 (1-16) (2020) (SCI) (指導作者)

179)   C.J. Weng, D. Lee, J. Ho, S.J. Liu*. Doxycycline-embedded nanofibrous membranes help promote healing of tendon rupture. International Journal of Nanomedicine, 15, 125-136 (2020) (SCI) (指導作者)

178)   C.H. Lee, K.C. Hung, M.J. Hsieh, S.H. Chang, J.H. Juang, I.C. Hsieh, M.S. Wen, S.J. Liu*. Core-shell insulin-loaded nanofibrous scaffolds for repairing diabetic wounds. Nanomedicine: Nanotechnology, Biology, and Medicine 24, 102123 (2020) (SCI) (指導作者)

2019

177)   Y.H. Hsu, H.Y. Chen, J.C. Chen, Y.H. Yu, Y.C. Chou, S.W.N. Ueng*, S.J. Liu*. Resorbable beads provide extended release of antifungal medication: In vitro and in vivo analyses. Pharmaceutics, 11, 550 (2019) (SCI) (指導作者)

176)   S.J. Liu, S.T. Yang, S.M. Chen, Y.C. Huang, W.H. Lee, J. Ho, Y.C. Chen, Y.Y. Tseng. Novel multi-drugs incorporated hybrid-structured nanofibers enhance alkylating agents activity in malignant gliomas. Therapeutic Advances in Medical Oncology, 11, 1-17 (2019)

175)   C.H. Lee, M.J. Hsieh, S.H. Chang, K.C. Hung, C.J. Wang, M.Y. Hsu, J.H. Juang, I.C. Hsien, M.S. Wen, S.J. Liu*, Nanofibrous vildagliptin-eluting stents enhancere-endothelialization and reduce neointimal formation in diabetes: in vitro and in vivo International Journal of Nanomedicine, 14, 7503–7513 (2019) (SCI) (指導作者)

174)   C.W. Kao, Y.Y. Tseng, K.S. Liu, J.C. Chen, H.L. He, Y.C. Kau, S.J. Liu*, Anesthetics and human
epidermal growth factor incorporated into anti-adhesive nanofibers provide sustained pain relief and promote healing of surgical wounds, International Journal of Nanomedicine, 14, 4007–4016 (2019) (SCI) (指導作者)

173)   M.Y. Hsu, C.H. Feng, Y.W. Liu, S.J. Liu*, An orthogonal model to study the effect of electrospraying parameters on the morphology of poly (D,L)-lactide-co-glycolide (PLGA) particles, Applied Sciences, 9, 1077 (2019) (SCI) (指導作者)

172)   Y.P. Chen, H.Y. Liu, Y.W. Liu, T.Y. Lee, S.J. Liu*, Determination of Electrospinning Parameters’ Strength in Poly(D,L)-lactide-co-glycolide Micro/Nanofibers Diameter Tailoring, Journal of Nanomaterials, 2019, 2626085-8 (2019) (SCI) (指導作者)

171)   Y.P. Chen, Y.W. Liu, D. Lee, J.T. Qiu, T.Y. Lee, S.J. Liu*, Biodegradable Andrographolide-eluting Nanofibrous Membranes for the Treatment of Cervical Cancer, International Journal of Nanomedicine,14, 421–429 (2019) (SCI) (指導作者)

2018

170)   S.J. Liu, T.C. Yang, S.T. Yang, Y.C. Chen, Y.Y. Tseng, Biodegradable hybrid-structured nanofibrous membrane supported chemoprotective gene therapy enhances chemotherapy tolerance and efficacy in malignant glioma rats, Artificial Cells, Nanomedicine and Biotechnology, 46, S515-S526 (2018) (SCI)

169)   K.S. Liu, W.H. Chen, C.H. Lee, Y.F. Su, S.J. Liu*, Extended Pain Relief Achieved by Analgesic-eluting Biodegradable Nanofibers in the Nuss Procedure: In Vitro and In Vivo Studies, International Journal of Nanomedicine, 13, 8355–8364 (2018) (SCI) (指導作者)

168)   Y.H. Yu, R.C. Wu, D. Lee, C.K. Chen, S.J. Liu*, Artificial membrane induced by novel biodegradable nanofibers in the Masquelet procedure for treatment of segmental bone defects, Journal of Nanomaterials, 2018, 8246571-8 (2018) (SCI) (指導作者)

167)   C.H. Lee, M.J. Hsieh, S.H. Chang, S.J. Liu*, C.J. Wang, K.C. Hung, Y.H. Yeh, W.J. Chen, I.C. Hsieh, M.S. Wen, Promoting vascular healing using nanofibrous ticagrelor-eluting stents, International Journal of Nanomedicine, 13, 6039-6048 (2018) (SCI) (指導作者)

166)   D. Lee, M.Y. Hsu, M.J. Li, Y.W. Liu, S.J. Liu*, C.Y. Liu, H. Ito, Factors affecting the co-axial electrospraying of core–shell-structured poly(d,l-lactide-co-glycolide) microparticles, Japanese Journal of Applied Physics, 57, 116702 (2018) (SCI) (指導作者)

165)   Y.H. Hsu, D.W. Chen, M.J. Li, Y.H. Yu, Y.C. Chou, S.J. Liu*, Sustained Delivery of Analgesic and Antimicrobial Agents to Knee Joint by Direct Injections of Electrosprayed Multipharmaceutical-Loaded Nano/Microparticles. Polymers 10, 890-16 (2018) (SCI) (指導作者)

164)   C.H. Lee, M.J. Hsieh, S.C. Liu, J.K. Chen, S.J. Liu*, I.C. Hsieh, M.S. Wen, K.C. Hung, Novel Bifurcation Stents Coated with Bioabsorbable Nanofibers with Extended and Controlled Release of Rosuvastatin and Paclitaxel, Materials Science & Engineering C, 88, 61-69 (2018) (SCI) (指導作者)

163)   S.H. Chang, C.H. Lee, Y.H. Ush, S.J. Liu, C.J. Wang, M.Y. Hsu, W.J. Chen, Propylthiouracil-coated biodegradable polymer inhibited neointimal formation and enhanced re-endothelialization after vascular injury, International Journal of Nanomedicine, 13 1761–1771 (2018) (SCI)

162)   Y.C. Lin, K.S. Liu, D. Lee, M.J. Li, S.J. Liu*, H. Ito, In Vivo and In Vitro Elution of Analgesics from Multilayered Poly(D,L)-lactide-co-glycolide Nanofibers Incorporated Ureteral Stents, Journal of Nanomaterials, 2018, 4943210-7 (2018) (SCI) (指導作者)

2017

161)   F.Y. Lee, D. Lee, T.C. Lee, J.K. Chen, R.C. Wu, K.C. Liu, S.J. Liu*, Fabrication of Multi-Layered Lidocaine and Epinephrine-Eluting PLGA/Collagen Nanofibers: In Vitro and In Vivo Study, Polymers, 9, 416 (2017) (SCI) (指導作者)

160)   C.W. Kao, D. Lee, M.H. Wu, J.K. Chen, H.L. He, S.J. Liu*, Lidocaine/Ketorolac Loaded Biodegradable Nanofibrous Anti-adhesive Membranes that Offer Sustained Pain Relief for Surgical Wounds, International Journal of Nanomedicine, 12, 5893-5901 (2017) (SCI) (指導作者)

159)   Y.C. Chou, D. Lee, T.M. Chang, Y.H. Hsu, Y.H. Yu, E.C. Chan, S.J. Liu*, Combination of a Biodegradable three-dimensional (3D) -Printed Cage for Mechanical Support and Nanofibrous Membranes for Sustainable Release of Antimicrobial Agents for Treating the  Femoral Metaphyseal Comminuted Fracture, Journal of the Mechanical Behavior of Biomedical Materials, 72, 209-218 (2017) (SCI) (指導作者)

158)   C.H. Lee, M.J. Hsieh, S.H. Chang, C.L. Chiang, C.L. Fan, S.J. Liu*, W.J. Chen, C.J. Wang, M.Y. Hsu, K.C. Hung, C.C. Chou, P.C. Chang, Biodegradable Cable-Tie Rapamycin-eluting Stents, Scientific Report, 7, 111 (1-12) (2017) (SCI) (指導作者)

157)   Y.Y. Tseng, T.C. Yang, Y.C. Wang, W.H. Lee, T.M. Chang, Y.C. Kau, S.J. Liu*, Targeted concurrent and sequential delivery of chemotherapeutic and antiangiogenic agents to the brain by using drug-loaded nanofibrous membranes, International Journal of Nanomedicine, 12, 1265-1276 (2017) (SCI) (指導作者)

2016

156)   Y.Y. Tseng, C.H. Su, S.T. Yang, Y.C. Huang, W.H. Lee,.Y.C. Wang, S.C. Liu, S.J. Liu*, Advanced interstitial chemotherapy combined with targeted treatment of malignant glioma in rats by using drug-loaded nanofibrous membranes, Oncotarget, 7(37), 59902-59916 (2016) (SCI) (指導作者)

155)   Y.Y. Tseng, Y.C. Kau, S.J. Liu*, Advanced Interstitial Chemotherapy for Treating Malignant Glioma, Expert Opinion on Drug Delivery, 13(11):1533-1544 (2016) (SCI) (指導作者)

154)   D. Lee, C.W. Kao, T.W. Huang, J.H. You, S.J. Liu*, Electrospinning of sheath-core structured chitosan/polylactide nanofibers for the removal of metal ions, International Polymer Processing, 31, 533-540 (2016) (SCI) (指導作者)

153)   Y.C. Chou, W.L. Yeh, C.L. Chao, Y.H. Hsu, Y.H. Yu, J.K. Chen, S.J. Liu*, Enhancement of tendon-bone healing via the combination of biodegradable collagen-loaded nanofibrous membranes and a 3-dimensional printed bone-anchoring bolt, International Journal of Nanomedicine, 11, 4173-4186 (2016) (SCI) (指導作者)

152)   Y.H. Hsu, C.T. Lin, Y.H. Yu, Y.C. Chou, S.J. Liu*, E.C. Chan, Dual delivery of active anti-bactericidal agents and bonemorphogenetic protein at sustainable high concentrations using biodegradable sheath-core-structured drug-eluting nanofibers, International Journal of Nanomedicine, 11, 3927–3937 (2016) (SCI) (指導作者)

151)   Y.Y. Tseng, Y.C. Huang, T.C. Yang, S.T. Yang, S.C. Liu, T.M. Chang, Y.C. Kau, S.J. Liu*, Concurrent Chemotherapy of Malignant Glioma in Rats by Using Multidrug-Loaded Biodegradable Nanofibrous Membranes, Scientific Report, 6, 30630 (2016) (SCI) (指導作者)

150)   Y.H. Yu, Y.H. Hsu, Y.C. Chou, C.L. Fan, S.W.N. Ueng, Y.C. Kau, S.J. Liu*, Sustained Relief of Pain from Osteosynthesis Surgery of Rib Fracture by Using Biodegradable Lidocaine-eluting Nanofibrous Membranes, Nanomedicine: Nanotechnology, Biology and Medicine, 12, 1785-1793 (2016) (SCI) (指導作者)

149)   S.W.N. Ueng, S.S. Lin, I.C. Wang, C.Y. Yang, R.C. Cheng, S.J. Liu, E.C. Chan, C.F. Lai, L.J. Yuan, S.C. Chan, Efficacy of vancomycin-releasing biodegradable poly(lactide-co-glycolide) antibiotics beads for treatment of experimental bone infection due to Staphylococcus aureus, Journal of Orthopaedic Surgery and Research, 11, 52 (1-9) (2016) (SCI)

148)   Y.C. Chou, D. Lee, T.M. Chang, Y.H. Hsu, Y.H. Yu, S.J. Liu*, S.W.N. Ueng, Development of a Three-Dimensional (3D) Printed Biodegradable Cage to Convert Morselized Corticocancellous Bone Chips into a Structured Cortical Bone Graft, International Journal of Molecular Science, 17, 595 (1-14) (2016) (SCI) (指導作者)

147)   Y.C. Chou, Y.S. Cheng, Y.H. Hsu, Y.H. Yu, S.J. Liu*, A Bio-artificial Poly([d,l]-lactide-co-glycolide) Drug-eluting Nanofibrous Periosteum for Segmental Long Bone Open Fractures with Significant Periosteal Stripping Injuries: In Vitro and In Vivo Studies, International Journal of Nanomedicine, 11, 941-953 (2016) (SCI) (指導作者)

146)   Y.C. Chou, Y.S. Cheng, Y.H. Hsu, Y.H. Yu, S.J. Liu^*, Biodegradable Nanofiber-Membrane for Sustainable Release of Lidocaine at the Femoral Fracture Site as a Periosteal Block: In Vitro and In Vivo Studies in a Rabbit Model, Colloids and Surfaces B: Biointerfaces, 140, 332-341 (2016) (SCI) (指導作者)

145)   C.H. Lee, Y.K. Chao, S.H. Chang, W.J. Chen, K.C. Hung, S.J. Liu^*, J.H. Juang, Y.T. Chen, F.S. Wang,Nanofibrous rhPDGF-eluting PLGA-collagen hybrid Scaffolds Enhance Healing of Diabetic Wounds, RSC Advances, 6, 6276-6284 (2016) (SCI) (指導作者)

2015

144)   C.H. Lee, K.S. Liu, S.H. Chang, W.J. Chen, K.C. Hung, S.J. Liu*, J.H.S. Pang, J.H. Juang, Y.T. Chen, Fu-Shing Wang, Promoting Diabetic Wound Therapy Using Biodegradable rhPDGF-loaded Nanofibrous Membranes, Medicine, 94(47), e1873(1-8) (2015) (SCI) (指導作者)

143)   Y.H. Yu, C.L. Fan, Y.H. Hsu, Y.C. Chou, S.W.N. Ueng, S.J. Liu*, A Novel Biodegradable Polycaprolactone Fixator for Osteosynthesis Surgery of Rib Fracture: In vitro and in vivo study, Materials, 8, 7714-7722 (2015)(SCI) (指導作者)

142)   K.S. Liu, C.H. Lee, F.C. Tsai, G.H. Jhong, S.J. Liu*, Computational analysis of the mechanical behaviors of hemiarch and total arch replacements, Annals of Biomedical Engineering, 43, 2881-2891 (2015) (SCI) (指導作者)

141)   Y.Y. Tseng, Y.C. Wang, C.H. Su, T.C. Yang, T.M. Chang, Y.C. Kau, S.J. Liu*, Concurrent and Sustained Delivery of Carmustine, Irinotecan, and Cisplatin to the Cerebral Cavity Using Biodegradable Nanofibers: In vitro and In vivo Studies, Colloids and Surfaces B: Biointerfaces, 134, 254-261 (2015) (SCI) (指導作者)

140)   C.C. Niu, S.S. Lin, W.J. Chen, S.J. Liu, L.H. Chen, C.Y. Yang, C.J. Wang, L.J. Yuan, P.H. Chen, H.Y. Cheng, Benefits of biphasic calcium phosphate hybrid scaffold-driven osteogenic differentiation of mesenchymal stem cells through upregulated leptin receptor expression, Journal of Orthopaedic Surgery and Research, 10:111 (2015) (SCI)

139)   D.W.C. Chen, S.J. Liu*, Nanofibers used for delivery of anti-microbial agents, Nanomedicines, 10, 1959-1971 (2015)(SCI) (指導作者)

138)   Y.Y. Tseng, S.J. Liu*, Nanofibers used for the delivery of analgesics, Nanomedicines, 10, 1785-1800 (2015)(SCI) (指導作者)

137)   Y.K. Chao, C.H. Lee, K.S. Liu, Y.C. Wang, C.W. Wang, S.J. Liu*, Sustained release of bactericidal concentrations of penicillin in the pleural space via an antibiotic-eluting pigtail catheter coated with electrospun nanofibers: results from in vivo and in vitro studies,International Journal of Nanomedicine, 10, 3329-3336 (2015) (SCI) (指導作者)

136)   Y.K. Chao, Y.W. Wen, K.S. Liu, Y.C. Wang, C.W. Wang, S.J. Liu*, Biodegradable drug-eluting pellets provide steady and sustainable cisplatin release in the intrapleural cavity: In vivo and in vitro studies, International Journal of Pharmaceuticals, 484, 38-43 (2015) (SCI)(指導作者)

135)   K.S. Liu, C.H. Lee, Y.C. Wang, S.J. Liu*, Sustained Release of Vancomycin from Novel Biodegradable Nanofiber-Loaded Vascular Prosthetic Grafts: In vitro and in vivo study International Journal of Nanomedicine, 10, 885-891 (2015) (SCI) (指導作者)

134)   D. Lee, D.W.C. Chen, S.F. Chiu, S.J. Liu*, Electrospun nanofibrous polylactide/chitosan mats for the filtration of silver ions, Textile Research Journal, 85, 346-355 (2015)(SCI) (指導作者)

133)   Y.Y. Tseng, Y.C. Wang, C.H. Su, S.J. Liu*, Biodegradable Vancomycin-eluting Poly[(d,l)-lactide-co-glycolide] Nanofibers for the Treatment of Postoperative Central Nervous System Infection, Scientific Report, 5, 7849 (2015)(SCI) (指導作者)

132)   C.H. Lee, S.H. Chang, K.C. Hung, Y.H. Lin, S.J. Liu*, T.Y. Lin, M.J. Hsieh, J.H.S. Pang, J.H. Juang, Augmentation of Diabetic Wound Healing and Enhancement of Collagen Content using Nanofibrous Glucophage-loaded Collagen/PLGA Scaffold Membranes, Journal of Colloid and Interface Science, 439, 88-97 (2015)(SCI) (指導作者)

2014

131)   Y.C. Kau, C.C. Liao, Y.C. Chen, S.J. Liu*, Sustained Release of Lidocaine from Solvent-free Biodegradable Poly[(d,l)-lactide-co-glycolide] (PLGA): In vitro and in vivo study, Materials, 7, 6660-6676 (2014) (SCI) (指導作者)

130)   C.H. Lee, C.Y. Yu, S.H. Chang, K.C. Hung, S.J. Liu*, C.J. Wang, M.Y. Hsu, I.C. Hsieh, W.J. Chen, Y.S. Ko, M.S. Wen, Promoting Endothelial Recovery and Reducing Neointimal Hyperplasia Using Sequential-like Release of Acetylsalicylic Acid and Paclitaxel-loaded Biodegradable Stents, International Journal of Nanomedicine, 9, 4117-4133 (2014) (SCI) (指導作者)

129)   Y.H. Hsu, D.W.C. Chen, C.D. Tai, S.J. Liu*, E.C. Chan, Biodegradable drug-eluting nanofibers enveloped implants providing sustained release of high bactericidal concentrations of vancomycin and ceftazidime: In vitro and in vivo study, International Journal of Nanomedicine, 9, 4347-4355 (2014) (SCI) (指導作者)

128)   C.H. Lee, G.H. Jhong, M.Y. Hsu, S.J. Liu*, C.J. Wang, K.C. Hung, Effect of force-induced mechanical stress at the coronary artery bifurcation stenting: Relation to in-stent restenosis, Journal of Applied Physics, 115, 204904 (1-9) (2014) (SCI) (指導作者)

127)   C.H. Lee, K.S. Liu, G.H. Jhong, S.J. Liu*, M.Y. Hsu, C.J. Wang, K.C. Hung, Finite Element Analysis of Helical Flows in Human Aortic Arch: A Novel Index, Biomicrofluidics, 8, 024111 (1-13) (2014) (SCI) (指導作者)

126)   C.H. Lee, M.J. Hsieh, S.H. Chang, Y.H. Lin, S.J. Liu*, T.Y. Lin, K.C. Hung, J.H.S. Pang, J.H. Juang, Enhancement of Diabetic Wound Repair Using Biodegradable Nanofibrous Metformin-Eluting Membranes: in Vitro and in Vivo, ACS Applied Materials and Interfaces, 6, 3979-3986 (2014) (SCI) (指導作者)

125)   C.H. Lee, S.H. Chang, Y.H. Lin, S.J. Liu*, C.J. Wang, M.Y. Hsu, K.C. Hung, Y.H. Yeh, W.J. Chen, I.C. Hsieh, M.S. Wen, Acceleration of re-endothelialization and inhibition of neointimal formation using hybrid biodegradable nanofibrous rosuvastatin-loaded stents, Biomaterials, 35, 4417-4427 (2014) (SCI) (指導作者)

124)   J.J. Wu, H.W. Lee, J.H. You, Y.C. Kau, S.J. Liu*, Adsorption of silver ions on polypyrrole embedded electrospun nanofibrous polyethersulfone membranes, Journal of Colloid and Interface Science, 420, 145-151 (2014) (SCI) (指導作者)

123)   Y.Y Tseng, J.Y. Liao, W.A. Chen, Y.C. Kao, S.J. Liu*, Biodegradable poly[(d,l)-lactide-co-glycolide] nanofibers for the sustainable delivery of lidocaine into the epidural space after laminectomy, Nanomedicines, 9, 77-87 (2014) (SCI) (指導作者)

122)   C.H. Lee, Y.H. Lin, S.H. Chang, C.D. Tai, S.J. Liu*, Y. Chu, C.J. Wang, M.Y. Hsu, H.Chang, G.J. Chang, K.C. Hung, M.J. Hsieh, F.C. Lin, I.C. Hsien, M.S. Wen, Y. Huang, Local Sustained Delivery of Acetylsalicylic Acid via Hybrid Stent/Biodegradable Nanofibers Reduces Adhesion of Blood Cells and Promotes Re-Endothelialization to the Denuded Artery, International Journal of Nanomedicine, 9, 311-326 (2014) (SCI) (指導作者)

2013

121)  Y.Y Tseng, Y.C. Kao, J.Y. Liao, W.A. Chen, S.J. Liu*, Biodegradable drug-eluting poly[(d,l)-lactide-co-glycolide] nanofibers for the sustainable delivery of vancomycin to the brain tissue: In vitro and in vivo studies, ACS Chemical Neuroscience, 4, 1314-1321 (2013) (SCI) (指導作者)

120)  C.H. Lee, C.L. Chiang, S.J. Liu*, Electrospun nanofibrous rhodanine/polymethylmethacrylate membranes for the removal of heavy metal ions, Separation and Purification Process, 118, 737-743 (2013) (SCI) (指導作者)

119)  Y.K. Chao, K.S. Liu, Y.C. Wang, Y.L. Huang, S.J. Liu*, Biodegradable cisplatin-eluting Tracheal Stent for malignant airway obstruction: In vivo and in vitro studies, Chest, 144, 193-199 (2013) (SCI) (指導作者)

118)  Y.Y Tseng, J.Y. Liao, W.A. Chen, Y.C. Kao, S.J. Liu*, Sustainable Release of Carmustine from Biodegradable Poly[(d,l)-lactide-co-glycolide] Nanofibrous Membranes in the Cerebral Cavity: In vitro and in vivo studies, Expert Opinion on Drug Delivery, 10, 879-888 (2013)(SCI) (指導作者)

117)  D. Lee, W.A. Chen, T.W. Huang, S.J. Liu*, Factors influencing the warpage in in-mold decoration (IMD) injection molded parts, International Polymer Processing, 28, 221-227 (2013) (SCI) (指導作者) NSC98-2221-E-182-003-MY3

116)  K.Y. Lin, S.J. Liu*, Fast Fabrication of Microfeatured Plastic Diffusers Using IR-assisted Injection Molding, Materials and Manufacturing Process, 28, 19-23 (2013) (SCI) (指導作者)

115)  Y.J. Peng, Y.T. Lu, K.S. Liu, S.J. Liu*, L. Fan, W.C. Huang, Biodegradable Balloon-expandable Self-locking Polycaprolactone Stents as Buckling Explants for the Treatment of Retinal Detachment: An in vitro and in vivo study, Journal of Biomedical Materials Research Part A, 101A, 167-175 (2013) (SCI) (指導作者)

114)  D.W.C. Chen, F.Y. Lee, J.Y. Liao, S.J. Liu*, C.Y. Hsiao, J.K. Chen, Preclinical experiments on the release behavior of biodegradable nanofibrous multi-pharmaceutical membranes in the four-wall intrabony defect, Antimicrobial Agents and Chemotherapy, 57, 9-14 (2013) (SCI) (指導作者)

113)  S.J. Liu, W.A. Chen, Nanofeatured anti-reflective films manufactured using hot roller imprinting and self-assembly nanosphere lithography, Optics and Laser Technology, 48, 226-234 (2013) (SCI) NSC100-2221-E-182-020-MY3

112)  Y.C. Kau, D.W.C. Chen, Y.T. Hsieh, F.Y. Lee, S.J. Liu*, Compression Molding of Biodegradable Drugeluting Implants for Sustained Release of Metronidazole and Doxycycline, Journal of Applied Polymer Science, 127, 554-560 (2013) (SCI) (指導作者)

2012

111)   C.H. Lee, C.J. Chen, S.J. Liu*, C.Y. Hsiao, J.K. Chen, The Development of Novel Biodegradable Bifurcation Stents for the Sustainable Release of Anti-Proliferative Sirolimus, Annals of Biomedical Engineering, 40, 1961-1970 (2012) (SCI) (指導作者)

110)   S.J. Liu, C.C. Huang, C.T. Liao, Continuous Infrared-assisted Double-sided Roll-to-roll Embossing of Flexible Polymer Substrates, Polymer Engineering and Science, 52, 1395-1401 (2012) (SCI)

109)   S.J. Liu, C.M. Hsu, P.W. Chang, Parameters Affecting the Ink Wash-off in In-mold Decoration of Injection Molded Parts, International Polymer Processing, 27, 224-230 (2012) (SCI)

108)   D.W.C. Chen, Y.H. Hsu, J.Y. Liao, S.J. Liu*, J.K. Chen, S.W.N. Ueng, Sustainable Release of Vancomycin, Gentamicin and Lidocaine from Novel Electrospun Sandwich-structured PLGA/collagen Nanofibrous Membranes, International Journal of Pharmaceutics, 430, 335-341 (2012) (SCI) (指導作者)

107)   K.S. Liu, S.J. Liu*, H.Y. Chen, Y.K. Huang, Y.J. Peng, R.C. Wu, S.W.N. Ueng, Steady Antibiotic Release from Biodegradable Beads in the Pleural Cavity: An In Vitro and In Vivo Study, Chest, 141, 1197-1202 (2012) (SCI) (指導作者)

106)   C.Y. Hsaio, S.J. Liu*, S.W.N. Ueng, E.C. Chan, The influence of gamma irradiation and ethylene oxide treatment on the release characteristics of biodegradable poly(lactide-co-glycolide) composites, Polymer Degradation and Stability, 97, 715-720 (2012) (SCI) (指導作者)

105)   D.W.C. Chen, J.Y. Liao, S.J. Liu*, E.C Chan, Novel biodegradable sandwich-structured nanofibrous drug-eluting membranes for repair of infected wounds: an in vitro and in vivo study, International Journal of Nanomedicine, 7, 763-771 (2012) (SCI) (指導作者)

104)   S.J. Liu, C.T. Liao, Fast fabrication of nanostructured anti-reflection layers for enhancement of solar cells performance using plasma sputtering and infrared assisted roller embossing techniques, Optics Express, 20, 5143-5150 (2012) (SCI) --- NSC100-2221-E-182-020-MY3

2011

103)   S.J. Liu, W.R. Lin, K.Y. Lin, Morphological Development in Water Assisted Injection Molded Polyethylene/Polyamide-6 Blends, Polymers for Advanced Technology, 22, 2062-2068 (2011) (SCI) --- NSC95-2221-E-182-032-MY3

102)   F.Y. Lee, D.W. Chen, C.C. Hu, Y.T. Hsieh, S.J. Liu*, E.C. Chan, In-vitro and in-vivo investigation of drug-eluting implants for the treatment of periodontal disease, AAPS PharmSciTech, 12, 1110-1115 (2011) (SCI) (指導作者)

101)   S.J. Liu, L.Y. Chiou, J.Y. Liao, Ultra-low Dielectric Property of Electrospun Polylactide-polyglycolide Nanofibrous Membranes, Japanese Journal of Applied Physics, 50, 10PG05 (2011) (SCI)

100)   S.J. Liu, K.M. Peng, C.Y. Hsiao, K.S. Liu, H.T. Chung, J.K. Chan, Novel Biodegradable Polycaprolactone Occlusion Device Combining Nanofibrous PLGA/Collagen Membrane for Closure of Atrial Septal Defect (ASD), Annals of Biomedical Engineering, 39, 2759-2766 (2011) (SCI)

99)   S.W.N. Ueng, L.J. Yuan, S.S. Lin, S.J. Liu, E.C. Chan, K.T. Chen, M.S. Lee, In vitro and in vivo analysis of a biodegradable poly(lactide-co-glycolide) copolymer capsule and collagen composite system for antibiotics and bone cells delivery. Journal of Trauma, Injury, Infection and Critical Care, 70, 1503-1509 (2011) (SCI)

98)   J.W. Huang, S.S. Lin, L.H. Chen, S.J. Liu, C.C. Niu, L.J. Yuan, C.C. Wu, W.J. Chen, The use of fluorescence labeled mesenchymal stem cells in poly(lactide-co-glycolide)/hydorxyapatite/collagen hybrid graft as a bone substitute for posterolateral spinal fusion, Journal of Trauma, Injury, Infection and Critical Care, 70, 1495-1502 (2011) (SCI)

97)   S.J. Liu, C.W. Ho, Experimental and Numerical Analysis of the Temperature Distribution of Injection Molded Products Using Protruding Microprobes, Reviews in Scientific Instruments, 82, 055109 (2011) (SCI)

96)   S.J. Liu, C.Y. Hsiao, J.K. Chen, K.S. Liu, C.H. Lee, In-vitro Release of Anti-Proliferative Paclitaxel from Novel Balloon-expandable Polycaprolactone Stents, Materials Science and Engineering C: Materials for Biological Applications, 31, 1129-1135 (2011) (SCI)

95)   K.S. Liu, Y.H. Liu, Y.J. Peng, S.J. Liu, Experimental Absorbable Stent Permits Airway Remodeling, Journal of Thoracic and Cardiovascular Surgery, 141, 463-468 (2011) (SCI) (指導作者)

2010

94)   S.J. Liu, F.J. Chiang, C.Y. Hsiao, Y.C. Kau, K.S. Liu. Fabrication of Balloon-expandable Self-lock Drug-eluting Polycaprolactone Stents Using Micro-injection Molding and Spray Coating Techniques. Annals of Biomedical Engineering, 38, 3185-3194 (2010) (SCI)

93)   Y.J. Peng, Y.C. Kau, C.W. Wen, K.S. Liu and S.J. Liu*, Solvent-Free Biodegradable Scleral Plugs Providing Sustained Release of Vancomycin, Amikacin and Dexamethasone – An In Vivo Study, Journal of Biomedical Materials Research Part A, 94A, 426–432 (2010) (SCI) (指導作者)

92)   S.J. Liu, K.M. Peng, Rotational Molding of Polycarbonate Reinforced Polyethylene Composites: Processing parameters and properties, Polymer Engineering and Science, 50, 1457-1465 (2010) (SCI)--- NSC95-2221-E-182-032-MY3

91)   S.J. Liu, H.F. Cheng, The Influence of Interface Geometry on the Joint Strengths of Hot Plate Welded Composites, Journal of Reinforced Plastics and Composites, 29, 497-509 (2010) (SCI) --- NSC95-2221-E-182-032-MY3

90)   S.J. Liu, Y.C. Huang, S.Y. Yang, K.H. Hsieh, Rapid Fabrication of Surface-relief Plastic Diffusers by Ultrasonic Embossing, Optics and Laser Technology, 42, 794-798 (2010) (SCI)--- NSC96-2221-E-182-032-MY3

89)   S.J. Liu, Y.C. Kau, C.Y. Chou, J.K. Chen, R.C. Wu, W.L. Yeh. Electrospun PLGA/collagen nanofibrous membrane as early-stage wound dressing. Journal of Membrane Science, 355, 53-59 (2010) (SCI)

88)   K.Y. Lin, S.J. Liu*, Morphology of Fluid Assisted Injection Molded Polycarbonate/Polyethylene Blends, Macromolecular Materials and Engineering, 295, 342-350 (2010) (SCI)--- NSC95-2221-E-182-032-MY3 (指導作者)

87)   Y.J. Peng, C.W. Wen, S.H. Chiou, S.J. Liu*, Sustained Release of Ganciclovir and Foscarnet from Biodegradable Scleral Plugs for the Treatment of Cytomegalovirus Retinitis, Biomaterials, 31, 1773-1779 (2010) (SCI) (指導作者)

2009

86)   S.J. Liu, Y.C. Huang, Manufacture of dual-side surface-relief diffusers with various cross angles using ultrasonic embossing technique, Optics Express, 17, 18083-18092 (2009) (SCI)

85)   K.Y. Lin, S.J. Liu*, The Influence of Processing Parameters on Fingering Formation in Fluid Assisted Injection Molded Disks, Polymer Engineering and Science, 49, 2257-2263 (2009) (SCI) --- NSC95-2221-E-182-032-MY3 (指導作者)

84)   S.J. Liu, P.C. Su, Novel Three-Dimensional In-Cavity Transient Temperature Measurements in Injection Molding and Fluid Assisted Injection Molding, Polymer Testing, 28, 66-74 (2009) (SCI) --- NSC95-2221-E-182-032-MY3

83)   S.J. Liu, Y.C. Kau, C.W. Liaw, Y.J. Peng, In-Vitro Elution of Vancomycin /Amikacin/Steroid from Solvent-free Biodegradable Scleral Plugs, International Journal of Pharmaceutics, 370, 75-80 (2009) (SCI)

82)   T.S. Fu, W.J. Ceh, L.H. Chen, S.S. Lin, S.J. Liu, S.W.N. Ueng, Enhancement of Posterolateral Lumbar Spine Fusion Using Low-Dose rhBMP-2 and Cultured Marrow Stromal Cells , Journal of Orthopaedic Research, 27, 380-384 (2009) (SCI)

81)   S.J. Liu, C.L. Hsueh, S.W.N. Ueng, S.S. Lin, J.K. Chen, Manufacture of Solvent-free Poly-lactic-glycolic Acid (PLGA) Scaffolds for Tissue Engineering, Asia Pacific Journal of Chemical Engineering, 4, 154-160 (2009) (SCI)

80)   S.J. Liu, P.C. Su, K.Y. Lin, In-situ Temperature Measurements in the Depths of Injection Molded Parts, Measurement, 42, 771-777 (2009) (SCI) --- NSC95-2221-E-182-032-MY3

79)   K.Y. Lin, F.A. Chang, S.J. Liu*, Using Differential Mold Temperatures to Improve the Residual Wall Thickness Uniformity around Curved Sections of Fluid Assisted Injection Molded Tubes, International Communication in Heat and Mass Transfer, 36, 491-497 (2009) (SCI) -- NSC96-2628-E-182-001-MY3 (指導作者)

78)   S.J. Liu, P.C. Su, An Experimental Setup to Measure the Transient Temperature Profiles in Water Assisted Injection Molding, International Polymer Processing, 14, 234-241 (2009) (SCI) --- NSC95-2221-E-182-032-MY3

77)   S.J. Liu, Water Asssited Injection Molding: A Review, International Polymer Processing, 14, 315-325 (2009) (SCI) --- NSC95-2221-E-182-032-MY3

2008

76)   S.J. Liu, and K.H. Fu, Experimental Investigation and Numerical Simulation of the Heating/Cooling Process in Rotational Molding Enhanced with Fins, Journal of Applied Polymer Science, 108, 1696-1705 (2008) (SCI) --- NSC95-2221-E-182-032-MY3

75)   S.J. Liu, K.Y. Lin and S.K. Tsai, Improving Weldline Strengths of Injection Molded Parts by Ultrasonic Oscillation, Plastic, Rubber and Composites: Macromolecular Engineering, 37, 23-28 (2008) (SCI) --- NSC96-2628-E-182-001-MY3

74)   S.J. Liu and K.H. Fu, Effect of the Enhancing Fins on the Heating/Cooling Efficiency of Rotational Molding and the Molded Product Qualities, Polymer Testing, 27, 209-220 (2008) (SCI) --- NSC95-2221-E-182-032-MY3

73)   S.J. Liu, and C.C. Shih, Water Assisted Injection Molding of Glass Fiber Reinforced Nylon-6 Composites, Journal of Reinforced Plastics and Composites, 27, 985-999 (2008)(SCI) --- NSC95-2221-E-182-032-MY3

72)   S.J. Liu, K.Y. Lin, and M.K. Li, Rapid Fabrication of Microstructures onto Plastic Substrates by Infrared Hot Embossing, International Polymer Processing, 23, 323-330 (2008)(SCI) --- NSC96-2628-E-182-001-MY3

71)   S.J. Liu, K.Y. Lin, C.C. Liu, Manufacture of Thermoplastic Elastomer Tubes by Water Assisted Injection Molding Technology, Rubber Chemistry and Technology, 81, 156-167 (2008) (SCI) --- NSC96-2628-E-182-001-MY3

 2007

70)   S.J. Liu, and C.H. Lin, An Experimental Study of Water-Assisted Injection Molding of Plastic Tubes with Dimensional Transitions, Journal of Reinforced Plastics and Composites, 26, 1441-1454 (2007) (SCI) --- NSC95-2221-E-182-032-MY3

69)   S.W.N. Ueng, M.S. Lee, S.S. Lin, E.C. Chang, S.J. Liu, Development of a Biodegradable Alginate Carrier System for Antibiotics and Bone Cells, Journal of Orthopaedic Research, 25, 62-72 (2007) (SCI)

68)   S.J. Liu, and Y.C. Chang, A Novel Soft-mold Roller Embossing Method for the Rapid Fabrication of Micro-blocks onto Glass Substrates, Journal of Micromechanics and Microengineering, 17, 172-179 (2007) (SCI) --- NSC95-2221-E-182-032-MY3

67)   S.J. Liu, P.S. Chi, S.S. Lin, S.W.N. Ueng, E.C. Chan, J.K. Chen, Novel Solvent-free Fabrication of Biodegradable Poly-lactic-glycolic Acid (PLGA) Capsules for Antibiotics and rhBMP-2 Delivery, International Journal of Pharmaceutics, 330, 45-53 (2007) (SCI)

66)   S.J. Liu and Y.C. Wu, Dynamic Visualization of Cavity Filling Process in Fluid-assisted Injection Molding - Gas vs. Water, Polymer Testing, 26, 232-242 (2007) (SCI) --- NSC 94-2216-E182-005

65)   S.J. Liu, M.H. Hsieh, Residual Wall Thickness Distribution at the Transition and Curve Sections of Water-Assisted Injection Molded Tubes, International Polymer Processing, 22, 82-89 (2007) (SCI) --- NSC 94-2216-E182-005

64)   S.J. Liu, M.J. Lin, Y.C. Wu, An Experimental Study of the Water-Assisted Injection Molding of Glass Fiber Filled Polybutylene Terephthalate (PBT) Composites, Composite Science and Technology, 67, 1415-1424 (2007) (SCI) --- NSC 94-2216-E182-005

2006

63)   S.J. Liu, Y.C. Wu, W.K. Chen, Surface Gloss Difference on Water Assisted Injection Molded Thermoplastic Parts: Effects of Processing Variables, Plastic, Rubber and Composites: Macromolecular Engineering, 35, 29-36 (2006) (SCI) --- NSC 93-2216-E182-004

62)   S.J. Liu, S.P. Lin, Parameters Affecting the Formation of Fingerings in Water-Assisted Injection Molded Thermoplastics, Advances in Polymer Technology, 25, 98-108 (2006) (SCI) --- NSC 93-2216-E182-004

61)   S.J. Liu, Y.C. Wu, A Novel High Flow-rate Pin for Water-Assisted Injection Molding of Plastic Parts with a More Uniform Residual Wall Thickness Distribution, International Polymer Processing, 21, 436-439 (2006) (SCI) --- NSC95-2221-E-182-032-MY3

60)   Y.C. Wu, K.M. Chen, S.J. Liu*, Core-out Geometries in Water Channels of Water-Assisted Injection Molded Parts, Plastic, Rubber and Composites: Macromolecular Engineering, 35, 425-431(2006) (SCI) --- NSC95-2221-E-182-032-MY3 (指導作者)

2005

59)   S.J. Liu, Y.E. Tsai, S.W.N. Ueng, E.C. Chan, A Novel Solvent-Free Method for the Manufacture of Biodegradable Antibiotic-Capsules for a Long-term Drug Release Using Compression Sintering and Ultrasonic Welding Techniques, Biomaterials, 26, 4662-4669 (2005) (SCI) --- NSC 93-2216-E-182-004

58)   S.J. Liu, and K.Y. Lin, Injection Compression Molding of Wedge-shaped Plates: Effects of Processing Parameters, Journal of Reinforced Plastics and Composites, 24, 373-384(2005) (SCI)

57)   Y.Z. Chang, T.T. Wen, and S.J. Liu, Derivation of Optimal Processing Parameters of Polypropylene Foam Thermoforming by an Artificial Neural Network, Polymer Engineering and Science, 45, 375-384(2005) (SCI)

56)   S.J. Liu, Y.T. Dung, Hot Embossing Microstructures onto Plastic Plates by Ultrasonic Vibration, Polymer Engineering and Science, 45, 915-925(2005) (SCI)

55)   S.J. Liu, S.P. Lin, Study of “Fingering” in Water Assisted Injection Molded Composites, Composite Part A: Applied Science and Manufacturing, 36, 1507-1517(2005) (SCI) --- NSC93-2216-E-182-004

54)   Y.C. Wu, S.J. Liu*, Flow Visualization of Water Assisted Injection Molding Process, Plastic, Rubber and Composites: Macromolecular Engineering, 34, 227-231 (2005) (SCI) (指導作者)

53)   S.J. Liu, Y.C. Wu, P.C. Lai, Water Penetration Stability in Water Assisted Injection Molded Symmetric Ribs, International Polymer Processing, 20, 352-359 (2005) (SCI)

52)   S.J. Liu, Y.T. Dung, Ultrasonic Vibration Hot Embossing – A novel technique for molding plastic microstructure, International Polymer Processing, 20, 449-452 (2005) (SCI)

2004

51)   G.M. Wu, C.H. Hung, J.H. You and S.J. Liu, Surface Modification of Reinforcement Fibers for Composites by Acid Treatments, Journal of Polymer Research, 11, 31-36(2004) (SCI)

50)   S.J. Liu, and C.Y. Yang, Application of Statistic Estimation to Weldline Strengths of Injection Molded Thermoplastic Composites, Journal of Reinforced Plastics and Composites, 23, 1383-1396(2004) (SCI)

49)   S.J. Liu, and W.K. Chen, Experimental Investigation and Numerical Simulation of the Cooling Process in Water Assisted Injection Molded Parts, Plastic, Rubber and Composites: Macromolecular Engineering, 33, 260-266(2004) (SCI) --- NSC 92-2216-E182-004

48)   S.J. Liu and Y.S. Chen, The Manufacturing of Thermoplastic Composites by Water Assisted Injection Molding Technology, Composite Part A: Applied Science and Manufacturing, 35, 171-180(2004)(SCI) --- NSC 91-2216-E182-006

47)   G. Wang, S.J. Liu, S.W.N. Ueng, and E.C. Chan, The Release of Cefazolin and Gentamicin from Biodegradable PLA/PGA Beads, International Journal of Pharmaceutics, 273, 203-212(2004)(SCI)

2003

46)   S.J. Liu, and K.H. Chang, Parameters Affecting the Full-shot Molding of Gas Assisted Injection Molded Parts, Advances in Polymer Technology, 22, 1 (2003)(SCI)

45)   C.H. Chen, W.J. Chen, C.H. Shih, S.J. Liu and P.Y. Lin, Enveloping the Tendon Graft with Periosteum to Enhance Tendon-Bone Healing in a Bone Tunnel- A Biomechanical and Histological Study in Rabbits, Arthroscopy-The Journal of Arthroscopic and Related Surgery, 18, 290-296(2003) (SCI)

44)   S.J. Liu, and C.Y. Chang, The Influence of Processing Parameters on Thin- wall Gas Assisted Injection Molding of Thermoplastic Materials, Journal of Reinforced Plastics and Composites, 22, 711(2003) (SCI)

43)   S.J. Liu, and Y.S. Chen, Water Assisted Injection Molding of Thermoplastic Materials: Effects of Processing Parameters, Polymer Engineering and Science, 43, 1806(2003)(SCI) --- NSC 91-2216-E182-006

42)   S.L. Hwang, S.J. Liu, W.L. Chen, C.L. Wang, S.W. Chou, Experimental Development of Processing Technology for Yuba-like Films Using Twin-Screw Extrusion, International Polymer Processing, 18, 343-348(2003)(SCI)

2002

41)   S.J. Liu and I.T. Chang,, Surface Roughness at the Transition Sites of Gas Assist Injection Molded Nylon Composites, Journal of Reinforced Plastics and Composites, 21, 217(2002)(SCI)

40)   S.J. Liu and I.T. Chang, Optimizing the Weld Strength of Ultrasonically Welded Nylon Composites, Journal of Composite Materials, 36, 611(2002)(SCI)

39)   S.J. Liu, and C.Y. Yang, An Experimental Study of the Weldline Caused by the Flow-lead Effect in Gas Assisted Injection Molded Parts, Plastics Rubber and Composites, 31, 36(2002)(SCI)

38)   S.J. Liu, and I.H. Lin, Glossy Difference on the Surface of Gas Assisted Injection Molded Parts, Plastics Rubber and Composites, 31, 28(2002)(SCI)

37)   S.J. Liu, and I.H. Lin, An Empirical Study of the Surface Blush in Gas-Assisted Injection Molded Parts, International Polymer Processing, 17, 60(2002)(SCI)

36)   S.J. Liu and C.F. Chen, Significance of Processing Parameters on the Warpage of Rotationally Molded Parts, Journal of Reinforced Plastics and Composites, 21, 723(2002)(SCI)

35)   S.J. Liu, C.H. Hsu and C.Y. Chang, Parametric Characterization of the Thin-Wall Injection Molding of Thermoplastic Composites, Journal of Reinforced Plastics and Composites, 21, 1027(2002)(SCI)

34)   S.W.N. Ueng, L.J. Yuan, N. Lee, S.S. Lin, S.J. Liu et al., In Vivo Study of Hot Compression Molded 50:50 Poly(DL-lactide-co-glycolide) Antibiotic Beads in Rabbits, Journal of Orthopedic Research, 20, 654(2002)(SCI)

33)   S.J. Liu and K.H. Chang, An Empirical Study of Gas Penetration in Full-shot Gas-assisted Injection Molded Parts, Proceeding Institute of Mechanical Engineering Part B: Journal of Engineering Manufacturing, 216, 1549(2002)(SCI)

32)   S.J. Liu, S.W.N. Ueng, S.S. Lin, E.C. Chan, In Vivo Release of Antibiotics from Biodegradable Beads., Journal of Biomedical Materials Research(Applied Biomaterials), 63, 807(2002)(SCI)

2001

31)   S.J. Liu, C.H. Lin and Y.C. Wu, Minimizing the Sinkmark in Injection Molded Thermoplastics, Advances in Polymer Technology, 20, 202(2001)(SCI)

30)   S.J. Liu, Effects of Processing Parameters on Formation of Sinkmark on Injection Molded Parts, Plastics Rubber and Composites, 30, 170(2001) (SCI)

29)   S.J. Liu and C.H. Yang, Rotational Molding of Two-Layered Polyethylene Foams, Advances in Polymer Technology, 20, 108(2001) (SCI)--- NSC 88-2216-E182-005

28)   S.J. Liu and C.Y. Yang, Optimizing the Weldline Strength of Injection Molded Liquid Crystal Polymers, Journal of Polymer Engineering, 21, 53(2001) (SCI)

27)   S.J. Liu and I.T. Chang, Factors Affecting the Joint Strength of Ultrasoncially Welded Polypropylene Composites, Polymer Composites, 22, 132(2001) (SCI)

2000

26)   S.J. Liu and C.F. Chen, Optimization of the Bubble Size of Rotationally Molded Parts, Plastic, Rubber and Composites, 29, 411(2000)(SCI) --- NSC 88-2216-E182-005

25)   S.J. Liu and J.H. Chang, Application of the Taguchi Method to Optimize the Surface Quality of Gas Assist Injection Molded Composites, Journal of Reinforced Plastics and Composites, 19, 1352(2000) (SCI)--- NSC 89-2216-E182-005

24)   S.J. Liu and C.H. Yang, Rotational Molding of Expanded Polyethylene by Pellet, Cellular Polymer, 19, 257(2000) (SCI)--- NSC 87-2216-E182-005

23)   S.J. Liu and Y.C. Wu, Factors Affecting the Stability of Gas Penetration in Gas Assist Injection Molded Bifurcation Parts, International Polymer Processing, 15, 297(2000) (SCI)

22)   S.J. Liu and C.Y. Ho, A Study of Warpage in Rotationally Molded Parts, Journal of Reinforced Plastics and Composites, 19, 992(2000)(SCI) --- NSC 87-2216-E182-005

21)   S.J. Liu, J.Y.Wu, J.H. Chang and S.W. Hung, An Experimental Matrix Design to Optimize the Weldline Strength of Injection Molded Parts, Polymer Engineering and Science, 40, 1256(2000) (SCI)

20)   S.J. Liu and J.H. Chang, The Occurrence of Surface Roughness in Gas Assist Injection Molded Nylon Composites, Polymer Composites, 21, 322(2000)(SCI) --- NSC 89-2216-E182-005

19)   Y.K. Chuah, L.H. Chien, B.C. Chang and S.J. Liu, Effects of the Shape of the Energy Director on Far-Field Ultrasonic Welding of Thermoplastics, Polymer Engineering and Science, 40, 157(2000) (SCI)

18)   S.J. Liu, C.C. Lai and S.T. Lin, Optimizing the Impact Strength of Rotationally Molded Parts, Polymer Engineering and Science, 40, 473(2000)(SCI)---NSC 87-2216-E182-005

1999

17)   S.J. Liu, C.H. Tsai, S.W.N. Ueng and S.S. Lin, Processing of Biodegradable Composites for a Durg Delivery System in Vitro, International Polymer Processing, 14, 322(1999) (SCI)

16)   S.W.N. Ueng, S.S. Lin, C.R. Wang, S.J. Liu, et al., Hyperbaric Oxygen Therapy Migrates the Adverse Effect of Cigarette Smoking on the Bone Healing of Tibial Lengthening: An Experimental Study on Rabbits, Journal of Trauma, 47, 752(1999) (SCI)

15)   S.J. Liu and C. H. Tsai, An Experimental Study of Foamed Polyethylene in Rotational Molding, Polymer Engineering and Science, 39, 1776(1999)(SCI)---NSC 86-2216-E182-002

14)   S.J. Liu and C.Y. Ho, Factors Affecting the Warpage of Rotationally Molded Parts, Advances in Polymer Technology, 18, 201(1999)(SCI) --- NSC 86-2216-E182-002

13)   S.S. Lin, S.W.N. Ueng, S.J. Liu, et al., Research and Development of A Biodegradable Antibiotic Delivery System, Clinical Orthopedic, 362, 240(1999) (SCI)

12)   S.J. Liu, W.F. Lin and B.C. Chang, G. Wu and S.W. Hung, Optimizing the Joint Strength in Ultrasonically Welded Thermoplastics, Advances in Polymer Technology, 18, 125(1999)(SCI) ---NSC 86-2214-E182-002

11)   S.J. Liu, Computer Simulation of the Inflation Process in Blow Molding, Journal of Reinforced Plastics and Composites, 18, 759(1999)(SCI)

10)   S.J. Liu, J.H. Chang, C.Y. Ho and S.W. Hung, Optimization of the Weldline Strength in Gas-Assist Injection Molded Thermoplastics, International Polymer Processing, 14, 191(1999) (SCI)

9)   S.J. Liu, Process Optimization of Thermoforming PP/CaCO3 Composites, International Polymer Processing, 14, 98(1999) (SCI)

8)   S.W.N. Ueng, S.S. Lin, C.R. Wang, S.J. Liu, et al., “Bone Healing of Tibial Lengthening is Delayed by Cigarette Smoking: Study of Bone Mineral Density and Torsinal Strength on Rabbits”, Journal of Trauma, 46, 110(1999) (SCI)

7)   S.J. Liu, S.W.N. Ueng, E.C. Chan, et. al., In Vitro Elution of Antibiotics from Biodegradable Beads., Journal of Biomedical Materials Research(Applied Biomaterials), 48, 613(1999) (SCI)

1998

6)   S.J. Liu, Sintering Rheology of Semi-crystalline Polymers, International Polymer Processing, 13, 88(1998)(SCI) ---NSC 86-2216-E182-002

5)   S.J. Liu, P.J. Chang, L.H. Chien and Y.H. Tsai, Development of Weldability Diagram for Ultrasonically Welded Thermoplastics., Rubber, Plastic and Composite, 27, 279(1998) (SCI)---NSC 86-2216-E182-002

4)   S.W.N. Ueng, S.S. Lee, S.S. Lin, C.R. Wang, S.J. Liu, et al., Bone Healing of Tibial Lengthening Is Enhanced by Hyperbaric Oxygen Therapy: A Study of Bone Mineral Density and Torsional Strength on Rabbits., Journal of Trauma, 44, 676(1998) (SCI)

1997

3)   S.J. Liu, Modeling and Simulation of Vacuum Forming of Wood Fiber Filled Thermoplastic Composites, Polymer Composites, 18, 673(1997) (SCI)

2)   S.J. Liu, A New Viscoelastic Phase Transformation Model to Simulate the Injection Molding Residual Stress, Journal of Applied Polymer Science, 62, 1537(1996) (SCI)

1)   S.J. Liu, Modeling and Simulation of Thermally Induced Stresses and Warpages in Injection Molded Thermoplastics, Polymer Engineering and Science, 36, 807(1996) (SCI)