首頁 I 研究方向I 老師簡介 I 研究團隊 I 研究成果I 實驗室剪影 I 聯絡方式
現在時間    
 

研究成果

 
SCI journal paper

 
2017
F.Y. Lee, D. Lee, T.C. Lee, J.K. Chen, R.C. Wu, K.C. Liu, S.J. Liu*, Fabrication of Multi-Layered Lidocaine and Epinephrine-Eluting PLGA/Collagen Nanofibers: In Vitro and In Vivo Study, Polymers, 9, 416 (2017) (SCI) (指導作者)
C.W. Kao, D. Lee, M.H. Wu, J.K. Chen, H.L. He, S.J. Liu*, Lidocaine/Ketorolac Loaded Biodegradable Nanofibrous Anti-adhesive Membranes that Offer Sustained Pain Relief for Surgical Wounds, International Journal of Nanomedicine, 12, 5893-5901 (2017) (SCI) (指導作者)
Y.C. Chou, D. Lee, T.M. Chang, Y.H. Hsu, Y.H. Yu, E.C. Chan, S.J. Liu*, Combination of a Biodegradable three-dimensional (3D) -Printed Cage for Mechanical Support and Nanofibrous Membranes for Sustainable Release of Antimicrobial Agents for Treating the  Femoral Metaphyseal Comminuted Fracture, Journal of the Mechanical Behavior of Biomedical Materials, 72, 209-218 (2017) (SCI) (指導作者)
C.H. Lee, M.J. Hsieh, S.H. Chang, C.L. Chiang, C.L. Fan, S.J. Liu*, W.J. Chen, C.J. Wang, M.Y. Hsu, K.C. Hung, C.C. Chou, P.C. Chang, Biodegradable Cable-Tie Rapamycin-eluting Stents, Scientific Report, 7, 111 (1-12) (2017) (SCI) (指導作者)
Y.Y. Tseng, T.C. Yang, Y.C. Wang, W.H. Lee, T.M. Chang, Y.C. Kau, S.J. Liu*, Targeted concurrent and sequential delivery of chemotherapeutic and antiangiogenic agents to the brain by using drug-loaded nanofibrous membranes, International Journal of Nanomedicine, 12, 1265-1276 (2017) (SCI) (指導作者)
2016
Y.Y. Tseng, C.H. Su, S.T. Yang, Y.C. Huang, W.H. Lee,.Y.C. Wang, S.C. Liu, S.J. Liu*, Advanced interstitial chemotherapy combined with targeted treatment of malignant glioma in rats by using drug-loaded nanofibrous membranes, Oncotarget, 7(37), 59902-59916 (2016) (SCI) (指導作者)
I.E.. Tseng, Y.C. Kau, S.J. Liu*, Advanced Interstitial Chemotherapy for Treating Malignant Glioma, Expert Opinion on Drug Delivery, 13(11):1533-1544 (2016) (SCI) (指導作者)  
D. Lee, C.W. Kao, T.W. Huang, J.H. You, S.J. Liu*, Electrospinning of sheath-core structured chitosan/polylactide nanofibers for the removal of metal ions, International Polymer Processing, 31, 533-540 (2016) (SCI) (指導作者)
Y.C. Chou, W.L. Yeh, C.L. Chao, Y.H. Hsu, Y.H. Yu, J.K. Chen, S.J. Liu*, Enhancement of tendon-bone healing via the combination of biodegradable collagen-loaded nanofibrous membranes and a 3-dimensional printed bone-anchoring bolt, International Journal of Nanomedicine, 11, 4173-4186 (2016) (SCI) (指導作者)
Y.H. Hsu, C.T. Lin, Y.H. Yu, Y.C. Chou, S.J. Liu*, E.C. Chan, Dual delivery of active anti-bactericidal agents and bonemorphogenetic protein at sustainable high concentrations using biodegradable sheath-core-structured drug-eluting nanofibers, International Journal of Nanomedicine, 11, 3927–3937 (2016) (SCI) (指導作者)
Y.Y. Tseng, Y.C. Huang, T.C. Yang, S.T. Yang, S.C. Liu, T.M. Chang, Y.C. Kau, S.J. Liu*, Concurrent Chemotherapy of Malignant Glioma in Rats by Using Multidrug-Loaded Biodegradable Nanofibrous Membranes, Scientific Report, 6, 30630 (2016) (SCI) (指導作者)
Y.H. Yu, Y.H. Hsu, Y.C. Chou, C.L. Fan, S.W.N. Ueng, Y.C. Kau, S.J. Liu*, Sustained Relief of Pain from Osteosynthesis Surgery of Rib Fracture by Using Biodegradable Lidocaine-eluting Nanofibrous Membranes, Nanomedicine: Nanotechnology, Biology and Medicine, 12, 1785-1793 (2016) (SCI) (指導作者)
S.W.N. Ueng, S.S. Lin, I.C. Wang, C.Y. Yang, R.C. Cheng, S.J. Liu, E.C. Chan, C.F. Lai, L.J. Yuan, S.C. Chan, Efficacy of vancomycin-releasing biodegradable poly(lactide-co-glycolide) antibiotics beads for treatment of experimental bone infection due to Staphylococcus aureus, Journal of Orthopaedic Surgery and Research, 11, 52 (1-9) (2016) (SCI)
Y.C. Chou, D. Lee, T.M. Chang, Y.H. Hsu, Y.H. Yu, S.J. Liu*, S.W.N. Ueng, Development of a Three-Dimensional (3D) Printed Biodegradable Cage to Convert Morselized Corticocancellous Bone Chips into a Structured Cortical Bone Graft, International Journal of Molecular Science, 17, 595 (1-14) (2016) (SCI) (指導作者)
Y.C. Chou, Y.S. Cheng, Y.H. Hsu, Y.H. Yu, S.J. Liu*, A Bio-artificial Poly([d,l]-lactide-co-glycolide) Drug-eluting Nanofibrous Periosteum for Segmental Long Bone Open Fractures with Significant Periosteal Stripping Injuries: In Vitro and In Vivo Studies, International Journal of Nanomedicine, 11, 941-953 (2016(SCI) (指導作者)
Y.C. Chou, Y.S. Cheng, Y.H. Hsu, Y.H. Yu, S.J. Liu*, Biodegradable Nanofiber-Membrane for Sustainable Release of Lidocaine at the Femoral Fracture Site as a Periosteal Block: In Vitro and In Vivo Studies in a Rabbit Model, Colloids and Surfaces B: Biointerfaces, 140, 332-341 (2016(SCI) (指導作者)
C.H. Lee, Y.K. Chao, S.H. Chang, W.J. Chen, K.C. Hung, S.J. Liu*, J.H. Juang, Y.T. Chen, F.S. Wang,Nanofibrous rhPDGF-eluting PLGA-collagen hybrid Scaffolds Enhance Healing of Diabetic Wounds, RSC Advances, 6, 6276-6284 (2016) (SCI) (指導作者)
2015
C.H. Lee, K.S. Liu, S.H. Chang, W.J. Chen, K.C. Hung, S.J. Liu*, J.H.S. Pang, J.H. Juang, Y.T. Chen, Fu-Shing Wang, Promoting Diabetic Wound Therapy Using Biodegradable rhPDGF-loaded Nanofibrous Membranes, Medicine, 94(47), e1873(1-8) (2015) (SCI) (指導作者)
Y.H. Yu, C.L. Fan, Y.H. Hsu, Y.C. Chou, S.W.N. Ueng, S.J. Liu*, A Novel Biodegradable Polycaprolactone Fixator for Osteosynthesis Surgery of Rib Fracture: In vitro and in vivo study, Materials, 8, 7714-7722 (2015)(SCI) (指導作者)
K.S. Liu, C.H. Lee, F.C. Tsai, G.H. Jhong, S.J. Liu*, Computational analysis of the mechanical behaviors of   hemiarch and total arch replacements, Annals of Biomedical Engineering, 43, 2881-2891 (2015(SCI) (指導作者)
Y.Y. Tseng, Y.C. Wang, C.H. Su, T.C. Yang, T.M. Chang, Y.C. Kau, S.J. Liu*, Concurrent and Sustained Delivery of Carmustine, Irinotecan, and Cisplatin to the Cerebral Cavity Using Biodegradable Nanofibers: In vitro and In vivo Studies, Colloids and Surfaces B: Biointerfaces, 134, 254-261 (2015) (SCI) (指導作者)
C.C. Niu, S.S. Lin, W.J. Chen, S.J. Liu, L.H. Chen, C.Y. Yang, C.J. Wang, L.J. Yuan, P.H. Chen, H.Y. Cheng, Benefits of biphasic calcium phosphate hybrid scaffold-driven osteogenic differentiation of mesenchymal stem cells through upregulated leptin receptor expression, Journal of Orthopaedic Surgery and Research, 10:111 (2015) (SCI)
D.W.C. Chen, S.J. Liu*, Nanofibers used for delivery of anti-microbial agents, Nanomedicines, 10, 1959-1971 (2015)(SCI) (指導作者)
Y.Y. Tseng, S.J. Liu*, Nanofibers used for the delivery of analgesics, Nanomedicines,10 ,1785-1800 (2015)(SCI) (指導作者)
Y.K. Chao, C.H. Lee, K.S. Liu, Y.C. Wang, C.W. Wang, S.J. Liu*, Sustained release of bactericidal concentrations of penicillin in the pleural space via an antibiotic-eluting pigtail catheter coated with electrospun nanofibers: results from in vivo and in vitro studies,International Journal of Nanomedicine, 10, 3329-3336 (2015) (SCI) (指導作者)
Y.K. Chao, Y.W. Wen, K.S. Liu, Y.C. Wang, C.W. Wang, S.J. Liu*, Biodegradable drug-eluting pellets provide steady and sustainable cisplatin release in the intrapleural cavity: In vivo and in vitro studies, International Journal of Pharmaceuticals, 484, 38-43 (2015) (SCI)(指導作者)
K.S. Liu, C.H. Lee, Y.C. Wang, S.J. Liu*, Sustained Release of Vancomycin from Novel Biodegradable Nanofiber-Loaded Vascular Prosthetic Grafts: In vitro and in vivo study International Journal of Nanomedicine, 10, 885-891 (2015) (SCI) (指導作者)
D. Lee, D.W.C. Chen, S.F. Chiu, S.J. Liu*, Electrospun nanofibrous polylactide/chitosan mats for the filtration of silver ions, Textile Research Journal, 85, 346-355 (2015)(SCI) (指導作者)
Y.Y. Tseng, Y.C. Wang, C.H. Su, S.J. Liu*, Biodegradable Vancomycin-eluting Poly[(d,l)-lactide-co-glycolide] Nanofibers for the Treatment of Postoperative Central Nervous System Infection, Scientific Report, 5, 7849 (2015)(SCI) (指導作者)
C.H. Lee, S.H. Chang, K.C. Hung, Y.H. Lin, S.J. Liu*, T.Y. Lin, M.J. Hsieh, J.H.S. Pang, J.H. Juang, Augmentation of Diabetic Wound Healing and Enhancement of Collagen Content using Nanofibrous Glucophage-loaded Collagen/PLGA Scaffold Membranes, Journal of Colloid and Interface Science, 439, 88-97 (2015)(SCI) (指導作者)
2014
Y.C. Kau, C.C. Liao, Y.C. Chen, S.J. Liu*, Sustained Release of Lidocaine from Solvent-free Biodegradable Poly[(d,l)-lactide-co-glycolide] (PLGA): In vitro and in vivo study, Materials, 7, 6660-6676 (2014) (SCI) (指導作者)
C.H. Lee, C.Y. Yu, S.H. Chang, K.C. Hung, S.J. Liu*, C.J. Wang, M.Y. Hsu, I.C. Hsieh, W.J. Chen, Y.S. Ko, M.S. Wen, Promoting Endothelial Recovery and Reducing Neointimal Hyperplasia Using Sequential-like Release of Acetylsalicylic Acid and Paclitaxel-loaded Biodegradable Stents, International Journal of Nanomedicine, 9, 4117-4133 (2014) (SCI) (指導作者)
Y.H. Hsu, D.W.C. Chen, C.D. Tai, S.J. Liu*, E.C. Chan, Biodegradable drug-eluting nanofibers enveloped implants providing sustained release of high bactericidal concentrations of vancomycin and ceftazidime: In vitro and in vivo study, International Journal of Nanomedicine, 9, 4347-4355 (2014) (SCI) (指導作者)
C.H. Lee, G.H. Jhong, M.Y. Hsu, S.J. Liu*, C.J. Wang, K.C. Hung, Effect of force-induced mechanical stress at the coronary artery bifurcation stenting: Relation to in-stent restenosis, Journal of Applied Physics, 115, 204904 (1-9) (2014) (SCI) (指導作者)
C.H. Lee, K.S. Liu, G.H. Jhong, S.J. Liu*, M.Y. Hsu, C.J. Wang, K.C. Hung, Finite Element Analysis of Helical Flows in Human Aortic Arch: A Novel Index, Biomicrofluidics, 8, 024111 (1-13) (2014) (SCI) (指導作者)
C.H. Lee, M.J. Hsieh, S.H. Chang, Y.H. Lin, S.J. Liu*, T.Y. Lin, K.C. Hung, J.H.S. Pang, J.H. Juang, Enhancement of Diabetic Wound Repair Using Biodegradable Nanofibrous Metformin-Eluting Membranes: in Vitro and in Vivo, ACS Applied Materials and Interfaces, 6, 3979-3986 (2014) (SCI) (指導作者)
C.H. Lee, S.H. Chang, Y.H. Lin, S.J. Liu*, C.J. Wang, M.Y. Hsu, K.C. Hung, Y.H. Yeh, W.J. Chen, I.C. Hsieh, M.S. Wen, Acceleration of re-endothelialization and inhibition of neointimal formation using hybrid biodegradable nanofibrous rosuvastatin-loaded stents, Biomaterials, 35, 4417-4427 (2014) (SCI) (指導作者)
J.J. Wu, H.W. Lee, J.H. You, Y.C. Kau, S.J. Liu*, Adsorption of silver ions on polypyrrole embedded electrospun nanofibrous polyethersulfone membranes, Journal of Colloid and Interface Science, 420, 145-151 (2014) (SCI) (指導作者)
Y.Y Tseng, J.Y. Liao, W.A. Chen, Y.C. Kao, S.J. Liu*, Biodegradable poly[(d,l)-lactide-co-glycolide] nanofibers for the sustainable delivery of lidocaine into the epidural space after laminectomy, Nanomedicines, 9, 77-87 (2014) (SCI) (指導作者)
C.H. Lee, Y.H. Lin, S.H. Chang, C.D. Tai, S.J. Liu*, Y. Chu, C.J. Wang, M.Y. Hsu, H.Chang, G.J. Chang, K.C. Hung, M.J. Hsieh, F.C. Lin, I.C. Hsien, M.S. Wen, Y. Huang, Local Sustained Delivery of Acetylsalicylic Acid via Hybrid Stent/Biodegradable Nanofibers Reduces Adhesion of Blood Cells and Promotes Re-Endothelialization to the Denuded Artery, International Journal of Nanomedicine, 9, 311-326 (2014) (SCI) (指導作者)
2013
Y.Y Tseng, Y.C. Kao, J.Y. Liao, W.A. Chen, S.J. Liu*, Biodegradable drug-eluting poly[(d,l)-lactide-co-glycolide] nanofibers for the sustainable delivery of vancomycin to the brain tissue: In vitro and in vivo studies, ACS Chemical Neuroscience, 4, 1314-1321 (2013) (SCI) (指導作者)
C.H. Lee, C.L. Chiang, S.J. Liu*, Electrospun nanofibrous rhodanine/polymethylmethacrylate membranes for the removal of heavy metal ions, Separation and Purification Process, 118, 737-743 (2013) (SCI) (指導作者)
Y.K. Chao, K.S. Liu, Y.C. Wang, Y.L. Huang, S.J. Liu*, Biodegradable cisplatin-eluting Tracheal Stent for malignant airway obstruction: In vivo and in vitro studies, Chest, 144, 193-199 (2013)(SCI) (指導作者)
Y.Y Tseng, J.Y. Liao, W.A. Chen, Y.C. Kao, S.J. Liu*, Sustainable Release of Carmustine from Biodegradable Poly[(d,l)-lactide-co-glycolide] Nanofibrous Membranes in the Cerebral Cavity: In vitro and in vivo studies, Expert Opinion on Drug Delivery, 10, 879-888 (2013)(SCI) (指導作者)
D. Lee, W.A. Chen, T.W. Huang, S.J. Liu*, Factors influencing the warpage in in-mold decoration (IMD) injection molded parts, International Polymer Processing, 28, 221-227 (2013) (SCI) (指導作者) NSC98-2221-E-182-003-MY3
K.Y. Lin, S.J. Liu*, Fast Fabrication of Microfeatured Plastic Diffusers Using IR-assisted Injection Molding, Materials and Manufacturing Process, 28, 19-23 (2013) (SCI) (指導作者)
Y.J. Peng, Y.T. Lu, K.S. Liu, S.J. Liu*, L. Fan, W.C. Huang, Biodegradable Balloon-expandable Self-locking Polycaprolactone Stents as Buckling Explants for the Treatment of Retinal Detachment: An in vitro and in vivo study, Journal of Biomedical Materials Research Part A, 101A, 167-175 (2013) (SCI) (指導作者)
D.W.C. Chen, F.Y. Lee, J.Y. Liao, S.J. Liu*, C.Y. Hsiao, J.K. Chen, Preclinical experiments on the release behavior of biodegradable nanofibrous multi-pharmaceutical membranes in the four-wall intrabony defect, Antimicrobial Agents and Chemotherapy, 57, 9-14 (2013) (SCI) (指導作者)
S.J. Liu, W.A. Chen, Nanofeatured anti-reflective films manufactured using hot roller imprinting and self-assembly nanosphere lithography, Optics and Laser Technology, 48, 226-234 (2013) (SCI) NSC100-2221-E-182-020-MY3
Y.C. Kau, D.W.C. Chen, Y.T. Hsieh, F.Y. Lee, S.J. Liu*, Compression Molding of Biodegradable Drugeluting Implants for Sustained Release of Metronidazole and Doxycycline, Journal of Applied Polymer Science, 127, 554-560 (2013) (SCI) (指導作者)
2012
C.H. Lee, C.J. Chen, S.J. Liu*, C.Y. Hsiao, J.K. Chen, The Development of Novel Biodegradable Bifurcation Stents for the Sustainable Release of Anti-Proliferative Sirolimus, Annals of Biomedical Engineering, 40, 1961-1970 (2012) (SCI) (指導作者)
S.J. Liu, C.C. Huang, C.T. Liao, Continuous Infrared-assisted Double-sided Roll-to-roll Embossing of Flexible Polymer Substrates, Polymer Engineering and Science, 52, 1395-1401 (2012) (SCI)
S.J. Liu, C.M. Hsu, P.W. Chang, Parameters Affecting the Ink Wash-off in In-mold Decoration of Injection Molded Parts, International Polymer Processing, 27, 224-230 (2012) (SCI)
D.W.C. Chen, Y.H. Hsu, J.Y. Liao, S.J. Liu*, J.K. Chen, S.W.N. Ueng, Sustainable Release of Vancomycin, Gentamicin and Lidocaine from Novel Electrospun Sandwich-structured PLGA/collagen Nanofibrous Membranes, International Journal of Pharmaceutics, 430, 335-341 (2012) (SCI) (指導作者)
K.S. Liu, S.J. Liu*, H.Y. Chen, Y.K. Huang, Y.J. Peng, R.C. Wu, S.W.N. Ueng, Steady Antibiotic Release from Biodegradable Beads in the Pleural Cavity: An In Vitro and In Vivo Study, Chest, 141, 1197-1202 (2012) (SCI) (指導作者)
C.Y. Hsaio, S.J. Liu*, S.W.N. Ueng, E.C. Chan, The influence of gamma irradiation and ethylene oxide treatment on the release characteristics of biodegradable poly(lactide-co-glycolide) composites, Polymer Degradation and Stability, 97, 715-720 (2012) (SCI) (指導作者)
D.W.C. Chen, J.Y. Liao, S.J. Liu*, E.C Chan, Novel biodegradable sandwich-structured nanofibrous drug-eluting membranes for repair of infected wounds: an in vitro and in vivo study, International Journal of Nanomedicine, 7, 763-771 (2012) (SCI) (指導作者)
S.J. Liu, C.T. Liao, Fast fabrication of nanostructured anti-reflection layers for enhancement of solar cells performance using plasma sputtering and infrared assisted roller embossing techniques, Optics Express, 20, 5143-5150 (2012) (SCI) --- NSC100-2221-E-182-020-MY3
2011
S.J. Liu, W.R. Lin, K.Y. Lin, Morphological Development in Water Assisted Injection Molded Polyethylene/Polyamide-6 Blends, Polymers for Advanced Technology, 22, 2062-2068 (2011) (SCI) --- NSC95-2221-E-182-032-MY3
F.Y. Lee, D.W. Chen, C.C. Hu, Y.T. Hsieh, S.J. Liu*, E.C. Chan, In-vitro and in-vivo investigation of drug-eluting implants for the treatment of periodontal disease, AAPS PharmSciTech, 12, 1110-1115 (2011) (SCI) (指導作者)
S.J. Liu, L.Y. Chiou, J.Y. Liao, Ultra-low Dielectric Property of Electrospun Polylactide-polyglycolide Nanofibrous Membranes, Japanese Journal of Applied Physics, 50, 10PG05 (2011) (SCI)
S.J. Liu, K.M. Peng, C.Y. Hsiao, K.S. Liu, H.T. Chung, J.K. Chan, Novel Biodegradable Polycaprolactone Occlusion Device Combining Nanofibrous PLGA/Collagen Membrane for Closure of Atrial Septal Defect (ASD), Annals of Biomedical Engineering, 39, 2759-2766 (2011) (SCI)
S.W.N. Ueng, L.J. Yuan, S.S. Lin, S.J. Liu, E.C. Chan, K.T. Chen, M.S. Lee, In vitro and in vivo analysis of a biodegradable poly(lactide-co-glycolide) copolymer capsule and collagen composite system for antibiotics and bone cells delivery. Journal of Trauma, Injury, Infection and Critical Care, 70, 1503-1509 (2011) (SCI)
J.W. Huang, S.S. Lin, L.H. Chen, S.J. Liu, C.C. Niu, L.J. Yuan, C.C. Wu, W.J. Chen, The use of fluorescence labeled mesenchymal stem cells in poly(lactide-co-glycolide)/hydorxyapatite/collagen hybrid graft as a bone substitute for posterolateral spinal fusion, Journal of Trauma, Injury, Infection and Critical Care, 70, 1495-1502 (2011) (SCI)
S.J. Liu, C.W. Ho, Experimental and Numerical Analysis of the Temperature Distribution of Injection Molded Products Using Protruding Microprobes, Reviews in Scientific Instruments, 82, 055109 (2011) (SCI)
S.J. Liu, C.Y. Hsiao, J.K. Chen, K.S. Liu, C.H. Lee, In-vitro Release of Anti-Proliferative Paclitaxel from Novel Balloon-expandable Polycaprolactone Stents, Materials Science and Engineering C: Materials for Biological Applications, 31, 1129-1135 (2011) (SCI)
K.S. Liu, Y.H. Liu, Y.J. Peng, S.J. Liu, Experimental Absorbable Stent Permits Airway Remodeling, Journal of Thoracic and Cardiovascular Surgery, 141, 463-468 (2011) (SCI) (指導作者)
2010
S.J. Liu, F.J. Chiang, C.Y. Hsiao, Y.C. Kau, K.S. Liu. Fabrication of Balloon-expandable Self-lock Drug-eluting Polycaprolactone Stents Using Micro-injection Molding and Spray Coating Techniques. Annals of Biomedical Engineering, 38, 3185-3194 (2010) (SCI)
Y.J. Peng, Y.C. Kau, C.W. Wen, K.S. Liu and S.J. Liu*, Solvent-Free Biodegradable Scleral Plugs Providing Sustained Release of Vancomycin, Amikacin and Dexamethasone – An In Vivo Study, Journal of Biomedical Materials Research Part A, 94A, 426–432 (2010) (SCI) (指導作者)
S.J. Liu, K.M. Peng, Rotational Molding of Polycarbonate Reinforced Polyethylene Composites: Processing parameters and properties, Polymer Engineering and Science, 50, 1457-1465 (2010) (SCI)--- NSC95-2221-E-182-032-MY3
S.J. Liu, H.F. Cheng, The Influence of Interface Geometry on the Joint Strengths of Hot Plate Welded Composites, Journal of Reinforced Plastics and Composites, 29, 497-509 (2010) (SCI)--- NSC95-2221-E-182-032-MY3
S.J. Liu, Y.C. Huang, S.Y. Yang, K.H. Hsieh, Rapid Fabrication of Surface-relief Plastic Diffusers by Ultrasonic Embossing, Optics and Laser Technology, 42, 794-798 (2010) (SCI)--- NSC96-2221-E-182-032-MY3
S.J. Liu, Y.C. Kau, C.Y. Chou, J.K. Chen, R.C. Wu, W.L. Yeh. Electrospun PLGA/collagen nanofibrous membrane as early-stage wound dressing. Journal of Membrane Science, 355, 53-59 (2010) (SCI)
K.Y. Lin, S.J. Liu*, Morphology of Fluid Assisted Injection Molded Polycarbonate/Polyethylene Blends, Macromolecular Materials and Engineering, 295, 342-350 (2010) (SCI)--- NSC95-2221-E-182-032-MY3 (指導作者)
Y.J. Peng, C.W. Wen, S.H. Chiou, S.J. Liu*, Sustained Release of Ganciclovir and Foscarnet from Biodegradable Scleral Plugs for the Treatment of Cytomegalovirus Retinitis, Biomaterials, 31, 1773-1779 (2010) (SCI) (指導作者)

2009

S.J. Liu, Y.C. Huang, Manufacture of dual-side surface-relief diffusers with various cross angles using ultrasonic embossing technique, Optics Express, 17, 18083-18092 (2009) (SCI)
K.Y. Lin, S.J. Liu*, The Influence of Processing Parameters on Fingering Formation in Fluid Assisted Injection Molded Disks, Polymer Engineering and Science, 49, 2257-2263 (2009) (SCI) --- NSC95-2221-E-182-032-MY3 (指導作者)
S.J. Liu, P.C. Su, Novel Three-Dimensional In-Cavity Transient Temperature Measurements in Injection Molding and Fluid Assisted Injection Molding, Polymer Testing, 28, 66-74 (2009) (SCI) --- NSC95-2221-E-182-032-MY3
S.J. Liu, Y.C. Kau, C.W. Liaw, Y.J. Peng, In-Vitro Elution of Vancomycin /Amikacin/Steroid from Solvent-free Biodegradable Scleral Plugs, International Journal of Pharmaceutics, 370, 75-80 (2009) (SCI)
T.S. Fu, W.J. Ceh, L.H. Chen, S.S. Lin, S.J. Liu, S.W.N. Ueng, Enhancement of Posterolateral Lumbar Spine Fusion Using Low-Dose rhBMP-2 and Cultured Marrow Stromal Cells , Journal of Orthopaedic Research, 27, 380-384 (2009) (SCI)
S.J. Liu, C.L. Hsueh, S.W.N. Ueng, S.S. Lin, J.K. Chen, Manufacture of Solvent-free Poly-lactic-glycolic Acid (PLGA) Scaffolds for Tissue Engineering, Asia Pacific Journal of Chemical Engineering, 4, 154-160 (2009) (SCI)
S.J. Liu, P.C. Su, K.Y. Lin, In-situ Temperature Measurements in the Depths of Injection Molded Parts, Measurement, 42, 771-777 (2009) (SCI) --- NSC95-2221-E-182-032-MY3
K.Y. Lin, F.A. Chang, S.J. Liu*, Using Differential Mold Temperatures to Improve the Residual Wall Thickness Uniformity around Curved Sections of Fluid Assisted Injection Molded Tubes, International Communication in Heat and Mass Transfer, 36, 491-497 (2009) (SCI) -- NSC96-2628-E-182-001-MY3 (指導作者)
S.J. Liu, P.C. Su, An Experimental Setup to Measure the Transient Temperature Profiles in Water Assisted Injection Molding, International Polymer Processing, 14, 234-241 (2009) (SCI) --- NSC95-2221-E-182-032-MY3
S.J. Liu, Water Asssited Injection Molding: A Review, International Polymer Processing, 14, 315-325 (2009) (SCI) --- NSC95-2221-E-182-032-MY3

S.J. Liu, and K.H. Fu, Experimental Investigation and Numerical Simulation of the Heating/Cooling Process in Rotational Molding Enhanced with Fins, Journal of Applied Polymer Science, 108, 1696-1705 (2008) (SCI) --- NSC95-2221-E-182-032-MY3
S.J. Liu, K.Y. Lin and S.K. Tsai, Improving Weldline Strengths of Injection Molded Parts by Ultrasonic Oscillation, Plastic, Rubber and Composites: Macromolecular Engineering, 37, 23-28 (2008) (SCI) --- NSC96-2628-E-182-001-MY3
S.J. Liu and K.H. Fu, Effect of the Enhancing Fins on the Heating/Cooling Efficiency of Rotational Molding and the Molded Product Qualities, Polymer Testing, 27, 209-220 (2008) (SCI) --- NSC95-2221-E-182-032-MY3
S.J. Liu, and C.C. Shih, Water Assisted Injection Molding of Glass Fiber Reinforced Nylon-6 Composites, Journal of Reinforced Plastics and Composites, 27, 985-999 (2008)(SCI) --- NSC95-2221-E-182-032-MY3
S.J. Liu, K.Y. Lin, and M.K. Li, Rapid Fabrication of Microstructures onto Plastic Substrates by Infrared Hot Embossing, International Polymer Processing, 23, 323-330 (2008)(SCI) --- NSC96-2628-E-182-001-MY3
S.J. Liu, K.Y. Lin, C.C. Liu, Manufacture of Thermoplastic Elastomer Tubes by Water Assisted Injection Molding Technology, Rubber Chemistry and Technology, 81, 156-167 (2008) (SCI) --- NSC96-2628-E-182-001-MY3

S.J. Liu, and C.H. Lin, An Experimental Study of Water-Assisted Injection Molding of Plastic Tubes with Dimensional Transitions, Journal of Reinforced Plastics and Composites, 26, 1441-1454 (2007) (SCI) --- NSC95-2221-E-182-032-MY3
S.W.N. Ueng, M.S. Lee, S.S. Lin, E.C. Chang, S.J. Liu, Development of a Biodegradable Alginate Carrier System for Antibiotics and Bone Cells, Journal of Orthopaedic Research, 25, 62-72 (2007) (SCI)
S.J. Liu, and Y.C. Chang, A Novel Soft-mold Roller Embossing Method for the Rapid Fabrication of Micro-blocks onto Glass Substrates, Journal of Micromechanics and Microengineering, 17, 172-179 (2007) (SCI) --- NSC95-2221-E-182-032-MY3
S.J. Liu, P.S. Chi, S.S. Lin, S.W.N. Ueng, E.C. Chan, J.K. Chen, Novel Solvent-free Fabrication of Biodegradable Poly-lactic-glycolic Acid (PLGA) Capsules for Antibiotics and rhBMP-2 Delivery, International Journal of Pharmaceutics, 330, 45-53 (2007) (SCI)
S.J. Liu and Y.C. Wu, Dynamic Visualization of Cavity Filling Process in Fluid-assisted Injection Molding - Gas vs. Water, Polymer Testing, 26, 232-242 (2007) (SCI) --- NSC 94-2216-E182-005
S.J. Liu, M.H. Hsieh, Residual Wall Thickness Distribution at the Transition and Curve Sections of Water-Assisted Injection Molded Tubes, International Polymer Processing, 22, 82-89 (2007) (SCI) --- NSC 94-2216-E182-005
S.J. Liu, M.J. Lin, Y.C. Wu, An Experimental Study of the Water-Assisted Injection Molding of Glass Fiber Filled Polybutylene Terephthalate (PBT) Composites, Composite Science and Technology, 67, 1415-1424 (2007) (SCI) --- NSC 94-2216-E182-005

S.J. Liu, Y.C. Wu, W.K. Chen, Surface Gloss Difference on Water Assisted Injection Molded Thermoplastic Parts: Effects of Processing Variables, Plastic, Rubber and Composites: Macromolecular Engineering, 35, 29-36 (2006) (SCI) --- NSC 93-2216-E182-004
S.J. Liu, S.P. Lin, Parameters Affecting the Formation of Fingerings in Water-Assisted Injection Molded Thermoplastics, Advances in Polymer Technology, 25, 98-108 (2006) (SCI) --- NSC 93-2216-E182-004
S.J. Liu, Y.C. Wu, A Novel High Flow-rate Pin for Water-Assisted Injection Molding of Plastic Parts with a More Uniform Residual Wall Thickness Distribution, International Polymer Processing, 21, 436-439 (2006) (SCI) --- NSC95-2221-E-182-032-MY3
Y.C. Wu, K.M. Chen, S.J. Liu*, Core-out Geometries in Water Channels of Water-Assisted Injection Molded Parts, Plastic, Rubber and Composites: Macromolecular Engineering, 35, 425-431(2006) (SCI) --- NSC95-2221-E-182-032-MY3 (指導作者)

 

S.J. Liu, Y.E. Tsai, S.W.N. Ueng, E.C. Chan, A Novel Solvent-Free Method for the Manufacture of Biodegradable Antibiotic-Capsules for a Long-term Drug Release Using Compression Sintering and Ultrasonic Welding Techniques, Biomaterials, 26, 4662-4669 (2005) (SCI) --- NSC 93-2216-E-182-004

S.J. Liu, and K.Y. Lin, Injection Compression Molding of Wedge-shaped Plates: Effects of Processing Parameters, Journal of Reinforced Plastics and Composites, 24, 373-384(2005) (SCI)
Y.Z. Chang, T.T. Wen, and S.J. Liu, Derivation of Optimal Processing Parameters of Polypropylene Foam Thermoforming by an Artificial Neural Network, Polymer Engineering and Science, 45, 375-384(2005) (SCI)
S.J. Liu, Y.T. Dung, Hot Embossing Microstructures onto Plastic Plates by Ultrasonic Vibration, Polymer Engineering and Science, 45, 915-925(2005) (SCI)
S.J. Liu, S.P. Lin, Study of “Fingering” in Water Assisted Injection Molded Composites, Composite Part A: Applied Science and Manufacturing, 36, 1507-1517(2005) (SCI) --- NSC93-2216-E-182-004
Y.C. Wu, S.J. Liu*, Flow Visualization of Water Assisted Injection Molding Process, Plastic, Rubber and Composites: Macromolecular Engineering, 34, 227-231 (2005) (SCI) (指導作者)
S.J. Liu, Y.C. Wu, P.C. Lai, Water Penetration Stability in Water Assisted Injection Molded Symmetric Ribs, International Polymer Processing, 20, 352-359 (2005) (SCI)
S.J. Liu, Y.T. Dung, Ultrasonic Vibration Hot Embossing – A novel technique for molding plastic microstructure, International Polymer Processing, 20, 449-452 (2005) (SCI)

G.M. Wu, C.H. Hung, J.H. You and S.J. Liu, Surface Modification of Reinforcement Fibers for Composites by Acid Treatments, Journal of Polymer Research, 11, 31-36(2004) (SCI)
S.J. Liu, and C.Y. Yang, Application of Statistic Estimation to Weldline Strengths of Injection Molded Thermoplastic Composites, Journal of Reinforced Plastics and Composites, 23, 1383-1396(2004) (SCI)
S.J. Liu, and W.K. Chen, Experimental Investigation and Numerical Simulation of the Cooling Process in Water Assisted Injection Molded Parts, Plastic, Rubber and Composites: Macromolecular Engineering, 33, 260-266(2004) (SCI) --- NSC 92-2216-E182-004
S.J. Liu and Y.S. Chen, The Manufacturing of Thermoplastic Composites by Water Assisted Injection Molding Technology, Composite Part A: Applied Science and Manufacturing, 35, 171-180(2004)(SCI) --- NSC 91-2216-E182-006
G. Wang, S.J. Liu, S.W.N. Ueng, and E.C. Chan, The Release of Cefazolin and Gentamicin from Biodegradable PLA/PGA Beads, International Journal of Pharmaceutics, 273, 203-212(2004)(SCI)
S.J. Liu, and K.H. Chang, Parameters Affecting the Full-shot Molding of Gas Assisted Injection Molded Parts, Advances in Polymer Technology, 22, 1 (2003)(SCI)
C.H. Chen, W.J. Chen, C.H. Shih, S.J. Liu and P.Y. Lin, Enveloping the Tendon Graft with Periosteum to Enhance Tendon-Bone Healing in a Bone Tunnel- A Biomechanical and Histological Study in Rabbits, Arthroscopy-The Journal of Arthroscopic and Related Surgery, 18, 290-296(2003) (SCI)
S.J. Liu, and C.Y. Chang, The Influence of Processing Parameters on Thin- wall Gas Assisted Injection Molding of Thermoplastic Materials, Journal of Reinforced Plastics and Composites, 22, 711(2003) (SCI)
S.J. Liu, and Y.S. Chen, Water Assisted Injection Molding of Thermoplastic Materials: Effects of Processing Parameters, Polymer Engineering and Science, 43, 1806(2003)(SCI) --- NSC 91-2216-E182-006
S.L. Hwang, S.J. Liu, W.L. Chen, C.L. Wang, S.W. Chou, Experimental Development of Processing Technology for Yuba-like Films Using Twin-Screw Extrusion, International Polymer Processing, 18, 343-348(2003)(SCI)
S.J. Liu and I.T. Chang,, Surface Roughness at the Transition Sites of Gas Assist Injection Molded Nylon Composites, Journal of Reinforced Plastics and Composites, 21, 217(2002)(SCI)
S.J. Liu and I.T. Chang, Optimizing the Weld Strength of Ultrasonically Welded Nylon Composites, Journal of Composite Materials, 36, 611(2002)(SCI)
S.J. Liu, and C.Y. Yang, An Experimental Study of the Weldline Caused by the Flow-lead Effect in Gas Assisted Injection Molded Parts, Plastics Rubber and Composites, 31, 36(2002)(SCI)
S.J. Liu, and I.H. Lin, Glossy Difference on the Surface of Gas Assisted Injection Molded Parts, Plastics Rubber and Composites, 31, 28(2002)(SCI)
S.J. Liu, and I.H. Lin, An Empirical Study of the Surface Blush in Gas-Assisted Injection Molded Parts, International Polymer Processing, 17, 60(2002)(SCI)
S.J. Liu and C.F. Chen, Significance of Processing Parameters on the Warpage of Rotationally Molded Parts, Journal of Reinforced Plastics and Composites, 21, 723(2002)(SCI)
S.J. Liu, C.H. Hsu and C.Y. Chang, Parametric Characterization of the Thin-Wall Injection Molding of Thermoplastic Composites, Journal of Reinforced Plastics and Composites, 21, 1027(2002)(SCI)
S.W.N. Ueng, L.J. Yuan, N. Lee, S.S. Lin, S.J. Liu et al., In Vivo Study of Hot Compression Molded 50:50 Poly(DL-lactide-co-glycolide) Antibiotic Beads in Rabbits, Journal of Orthopedic Research, 20, 654(2002)(SCI)
S.J. Liu and K.H. Chang, An Empirical Study of Gas Penetration in Full-shot Gas-assisted Injection Molded Parts, Proceeding Institute of Mechanical Engineering Part B: Journal of Engineering Manufacturing, 216, 1549(2002)(SCI)
S.J. Liu, S.W.N. Ueng, S.S. Lin, E.C. Chan, In Vivo Release of Antibiotics from Biodegradable Beads., Journal of Biomedical Materials Research(Applied Biomaterials), 63, 807(2002)(SCI)
S.J. Liu, C.H. Lin and Y.C. Wu, Minimizing the Sinkmark in Injection Molded Thermoplastics, Advances in Polymer Technology, 20, 202(2001)(SCI)
S.J. Liu, Effects of Processing Parameters on Formation of Sinkmark on Injection Molded Parts, Plastics Rubber and Composites, 30, 170(2001) (SCI)
S.J. Liu and C.H. Yang, Rotational Molding of Two-Layered Polyethylene Foams, Advances in Polymer Technology, 20, 108(2001) (SCI)--- NSC 88-2216-E182-005
S.J. Liu and C.Y. Yang, Optimizing the Weldline Strength of Injection Molded Liquid Crystal Polymers, Journal of Polymer Engineering, 21, 53(2001) (SCI)
S.J. Liu and I.T. Chang, Factors Affecting the Joint Strength of Ultrasoncially Welded Polypropylene Composites, Polymer Composites, 22, 132(2001) (SCI)
S.J. Liu and C.F. Chen, Optimization of the Bubble Size of Rotationally Molded Parts, Plastic, Rubber and Composites, 29, 411(2000)(SCI) --- NSC 88-2216-E182-005
S.J. Liu and J.H. Chang, Application of the Taguchi Method to Optimize the Surface Quality of Gas Assist Injection Molded Composites, Journal of Reinforced Plastics and Composites, 19, 1352(2000) (SCI)--- NSC 89-2216-E182-005
S.J. Liu and C.H. Yang, Rotational Molding of Expanded Polyethylene by Pellet, Cellular Polymer, 19, 257(2000) (SCI)--- NSC 87-2216-E182-005
S.J. Liu and Y.C. Wu, Factors Affecting the Stability of Gas Penetration in Gas Assist Injection Molded Bifurcation Parts, International Polymer Processing, 15, 297(2000) (SCI)
S.J. Liu and C.Y. Ho, A Study of Warpage in Rotationally Molded Parts, Journal of Reinforced Plastics and Composites, 19, 992(2000)(SCI) --- NSC 87-2216-E182-005
S.J. Liu, J.Y.Wu, J.H. Chang and S.W. Hung, An Experimental Matrix Design to Optimize the Weldline Strength of Injection Molded Parts, Polymer Engineering and Science, 40, 1256(2000) (SCI)
S.J. Liu and J.H. Chang, The Occurrence of Surface Roughness in Gas Assist Injection Molded Nylon Composites, Polymer Composites, 21, 322(2000)(SCI) --- NSC 89-2216-E182-005
Y.K. Chuah, L.H. Chien, B.C. Chang and S.J. Liu, Effects of the Shape of the Energy Director on Far-Field Ultrasonic Welding of Thermoplastics, Polymer Engineering and Science, 40, 157(2000) (SCI)
S.J. Liu, C.C. Lai and S.T. Lin, Optimizing the Impact Strength of Rotationally Molded Parts, Polymer Engineering and Science, 40, 473(2000)(SCI)---NSC 87-2216-E182-005
S.J. Liu, C.H. Tsai, S.W.N. Ueng and S.S. Lin, Processing of Biodegradable Composites for a Durg Delivery System in Vitro, International Polymer Processing, 14, 322(1999) (SCI)
S.W.N. Ueng, S.S. Lin, C.R. Wang, S.J. Liu, et al., Hyperbaric Oxygen Therapy Migrates the Adverse Effect of Cigarette Smoking on the Bone Healing of Tibial Lengthening: An Experimental Study on Rabbits, Journal of Trauma, 47, 752(1999) (SCI)
S.J. Liu and C. H. Tsai, An Experimental Study of Foamed Polyethylene in Rotational Molding, Polymer Engineering and Science, 39, 1776(1999)(SCI)---NSC 86-2216-E182-002
S.J. Liu and C.Y. Ho, Factors Affecting the Warpage of Rotationally Molded Parts, Advances in Polymer Technology, 18, 201(1999)(SCI) --- NSC 86-2216-E182-002
S.S. Lin, S.W.N. Ueng, S.J. Liu, et al., Research and Development of A Biodegradable Antibiotic Delivery System, Clinical Orthopedic, 362, 240(1999) (SCI)
S.J. Liu, W.F. Lin and B.C. Chang, G. Wu and S.W. Hung, Optimizing the Joint Strength in Ultrasonically Welded Thermoplastics, Advances in Polymer Technology, 18, 125(1999)(SCI) ---NSC 86-2214-E182-002
S.J. Liu, Computer Simulation of the Inflation Process in Blow Molding, Journal of Reinforced Plastics and Composites, 18, 759(1999)(SCI)
S.J. Liu, J.H. Chang, C.Y. Ho and S.W. Hung, Optimization of the Weldline Strength in Gas-Assist Injection Molded Thermoplastics, International Polymer Processing, 14, 191(1999) (SCI)
S.J. Liu, Process Optimization of Thermoforming PP/CaCO3 Composites, International Polymer Processing, 14, 98(1999) (SCI)
S.W.N. Ueng, S.S. Lin, C.R. Wang, S.J. Liu, et al., “Bone Healing of Tibial Lengthening is Delayed by Cigarette Smoking: Study of Bone Mineral Density and Torsinal Strength on Rabbits”, Journal of Trauma, 46, 110(1999) (SCI)
S.J. Liu, S.W.N. Ueng, E.C. Chan, et. al., In Vitro Elution of Antibiotics from Biodegradable Beads., Journal of Biomedical Materials Research(Applied Biomaterials), 48, 613(1999) (SCI)
S.J. Liu, Sintering Rheology of Semi-crystalline Polymers, International Polymer Processing, 13, 88(1998)(SCI) ---NSC 86-2216-E182-002
S.J. Liu, P.J. Chang, L.H. Chien and Y.H. Tsai, Development of Weldability Diagram for Ultrasonically Welded Thermoplastics., Rubber, Plastic and Composite, 27, 279(1998) (SCI)---NSC 86-2216-E182-002

S.W.N. Ueng, S.S. Lee, S.S. Lin, C.R. Wang, S.J. Liu, et al., Bone Healing of Tibial Lengthening Is Enhanced by Hyperbaric Oxygen Therapy: A Study of Bone Mineral Density and Torsional Strength on Rabbits., Journal of Trauma, 44, 676(1998) (SCI)

S.J. Liu, Modeling and Simulation of Vacuum Forming of Wood Fiber Filled Thermoplastic Composites, Polymer Composites, 18, 673(1997) (SCI)

S.J. Liu, A New Viscoelastic Phase Transformation Model to Simulate the Injection Molding Residual Stress, Journal of Applied Polymer Science, 62, 1537(1996) (SCI)

S.J. Liu, Modeling and Simulation of Thermally Induced Stresses and Warpages in Injection Molded Thermoplastics, Polymer Engineering and Science, 36, 807(1996) (SCI)